YOKOGAWA CP451-10 处理器模块

Yokogawa横河 CP451-10 CPU 处理器模块。由功能块和输入/输出组成的小型控制组将在控制图中进行描述。CP451-10 CPU 处理器模块通过将过程设备控制统一为控制图，可以简化工程和维护工作。CP451-10 CPU 处理器模块监控整个工厂或每个过程也可以指定为控制图，而不是指定不同设备之间的单个过程单元或功能。　CP451-10 CPU 处理器模块专用信号电缆连接、压力钳端子连接和 MIL 电缆连接。CP451-10 对于专用信号电缆连接，专用信号电缆用于通过端子板或继电器板连接现场设备。信号电缆接口适配器在结构上与CP451-10 I/O 模块集成在一起。通过分别选择 I/O 模块和信号电缆的选项代码，可以防止错误类型的 I/O 模块插入。至于压力钳端子连接，现场设备可以直接连接到 I/O 模块。

Yokogawa CP451-10 CPU processor module. A small control group consisting of functional blocks and input/output will be described in the control diagram. The CP451-10 CPU processor module simplifies engineering and maintenance work by unifying process equipment control into a control diagram. The CP451-10 CPU processor module can also be specified as a control diagram for monitoring the entire factory or each process, rather than specifying individual process units or functions between different devices. CP451-10 CPU processor module dedicated signal cable connection, pressure clamp terminal connection, and MIL cable connection. CP451-10 is used for dedicated signal cable connections, which are used to connect field devices through terminal boards or relay boards. The signal cable interface adapter is structurally integrated with the CP451-10 I/O module. By selecting option codes for I/O modules and signal cables separately, it is possible to prevent incorrect types of I/O modules from being inserted. As for the pressure clamp terminal connection, on-site devices can be directly connected to the I/O module.