8200-226 伺服阀驱动器

8200-226 伺服位置控制器 （SPC） 设计为伺服阀驱动器，可接受 DeviceNet 或基于 4 至 20 毫安的位置需求信号。 8200-226 可以精确定位比例伺服阀和积分伺服阀。 8200-226控制器由Woodward Inc制造，可在位于北卡罗来纳州罗利的AX Control Inc购买。

控制器还能够通过接受来自最多两个冗余交流设备或一个直流设备的反馈信号来处理阀门位置传感。8200-226 安装有基于 Windows 的软件，以正确配置型号，调整可调组件，并通过远程个人计算机监控设备的参数。

连接控制器时，请确保您选择的电源线受到适当保护，为了正确保护控制器，电源线应为 5 A、125 V 保险丝，当向控制器通电时，该保险丝应能够承受 20 A 和 100 ms 的冲击。不仅对于控制器的正常运行而且对于正确安装也很重要，您必须确保将控制器放置在远离潜在高电压或具有高电流的设备的区域，以及远离可能受到潜在水暴露的地方。

The 8200-226 servo position controller (SPC) is designed as a servo valve driver and can accept DeviceNet or position demand signals based on 4 to 20 mA. 8200-226 can accurately locate proportional servo valves and integral servo valves. The 8200-226 controller is manufactured by Woodward Inc and can be purchased from AX Control Inc located in Raleigh, North Carolina.

The controller can also handle valve position sensing by receiving feedback signals from up to two redundant AC devices or one DC device. 8200-226 is installed with Windows based software to correctly configure the model, adjust adjustable components, and monitor device parameters through remote personal computers.

When connecting the controller, please ensure that the power cord you have selected is properly protected. To properly protect the controller, the power cord should be a 5 A, 125 V fuse that can withstand 20 A and 100 ms of impact when powered on to the controller. Not only is it important for the normal operation of the controller, but it is also important for proper installation. You must ensure that the controller is placed in an area away from potential high voltage or high current equipment, as well as away from potential water exposure.