5466-258 单工离散输入/输出单元

5466-258 模块是单工离散输入/输出单元。该装置由伍德沃德生产，作为MicroNet Digital Control系列的一部分，该系列也可以与Vertex-Pro机箱一起使用。与该单元一起使用的典型硬件是MicroNet Plus硬件。该模块可用于单工和冗余系统。此模块可用于任何机箱模块，无论是 2 个插槽还是 <> 个插槽。请注意，本机的位置必须是非危险装置，或者在 I 类、<> 区、A 组、B 组、C 组和 D 组内。

5466-258 模块是 <>/<> 个离散组合模块，这表示有 <> 个输入和 <> 个输出。可以使用该模块的两种配置。其中一个将由两个二十四/十二个离散FTM组成，它们将通过两根高密度分立/模拟电缆连接到该模块。该模块上的离散输入将被光学隔离，并且在第二种配置中可以通过二十四/十二个FTM访问。

在前面板上，只有一个 LED 指示潜在故障。模块上还有两个连接器。5466-258模块被认为是过时的，因为伍德沃德不再生产，但仍然可以在新的和用过的剩余中找到。如果您想购买此模块，请联系AX Control的销售部门，他们可以为您提供报价以及运输估算。

The 5466-258 module is a simplex discrete input/output unit. This device is produced by Woodward and is part of the MicroNet Digital Control series, which can also be used with Vertex-Pro chassis. The typical hardware used with this unit is MicroNet Plus hardware. This module can be used for both simplex and redundant systems. This module can be used for any chassis module, whether it is 2 slots or<>slots. Please note that the location of this machine must be a non hazardous device, or within Class I,<>Zone, Groups A, B, C, and D.

The 5466-258 module is a<>/<>discrete combination module, which represents<>inputs and<>outputs. There are two configurations available for this module. One of them will consist of two twenty-four/twelve discrete FTMs, which will be connected to the module through two high-density discrete/analog cables. The discrete inputs on this module will be optically isolated and can be accessed through twenty-four/twelve FTMs in the second configuration.

On the front panel, only one LED indicates a potential fault. There are also two connectors on the module. The 5466-258 module is considered obsolete because Woodward no longer produces it, but it can still be found in the new and used surplus. If you would like to purchase this module, please contact the sales department of AX Control, who can provide you with a quotation and shipping estimate.