控制主板模块 2301E-8273-1011  以监测和控制发动机的运行

Woodward 2301E 8273-1011 是一款控制主板模块，通常用于发动机控制和自动化系统中，以监测和控制发动机的运行。以下是这个模块的主要产品功能：

发动机控制：Woodward 2301E 8273-1011 主板模块的主要功能之一是用于发动机控制。它可以监测和调整发动机的运行，以确保其正常操作。

数字输入/输出：模块通常配备多个数字输入和输出通道，用于连接到传感器、执行器和其他设备，以进行信号采集和控制操作。

通信接口：它通常具有多种通信接口，如串口、以太网、Modbus等，以便与其他系统组件和上级控制系统进行数据交换和通信。

可编程性：Woodward 2301E 8273-1011 主板模块通常是可编程的，允许用户根据具体应用需求编写和加载控制程序。

实时监测：模块通常能够提供实时数据，以及对发动机运行参数的实时监测和反馈。

故障检测和报警：它通常具有故障检测功能，可以监测系统和传感器的状态，并在出现问题时触发警报，以及时采取维护措施。

发动机保护：Woodward 2301E 8273-1011 主板模块通常配备发动机保护功能，可防止发动机在异常或危险条件下运行，并采取必要的措施来保护发动机。

数据记录和历史数据分析：一些模块支持数据记录功能，可以记录历史数据，以便进行故障诊断和性能分析。

可扩展性：模块通常具有可扩展性，允许用户添加额外的模块和通道，以满足不断变化的控制需求。 

伍德沃德2301E控制柴油或气体发动机驱动的发电机的负荷分配和速度。(在本手册中，这些动力源被称为“原动机”。)2301E是一种基于微处理器的数字控制，设计用于包括2301A和2301D负载共享控制的功能并与之兼容。增加的软件灵活性允许2301E包括控制功能，这些功能在以前版本的2301A和2301D控制系统中需要额外的设备。因此，2301E适用于升级现有控制系统，以增加新安装的功能。

2301E 8273-1011 控制器安装在一个金属板底盘中，由一个印刷电路板组成。2301E通过连接在控制装置前部9针连接器(RS-232端口)的外部计算机进行设置和配置。

2301E提供同步模式、下降模式或基本负载模式下的控制。2301E在添加到总线上或从总线上移除时，将允许软负载转移。

2301E控制硬件包括:

1个负载传感器

1个致动器驱动器

1个微处理器速度传感器

1路可配置模拟输出

2路可配置模拟输入

8个离散(开关)输入(3个输入可配置)

4路可配置离散(继电器驱动器)输出

2个串行端口(RS-232和RS-422)

控制主板模块 2301E-8273-1011  以监测和控制发动机的运行

Woodward 2301E 8273-1011 is a control board module commonly used in engine control and automation systems to monitor and control engine operation. The following are the main product features of this module:

Engine control: One of the main functions of the Woodward 2301E 8273-1011 motherboard module is for engine control. It can monitor and adjust the operation of the engine to ensure its normal operation.

Digital input/output: Modules are typically equipped with multiple digital input and output channels for connection to sensors, actuators, and other devices for signal acquisition and control operations.

Communication interface: It usually has a variety of communication interfaces, such as serial port, Ethernet, Modbus, etc., in order to exchange data and communicate with other system components and superior control systems.

Programmability: Woodward 2301E 8273-1011 motherboard modules are typically programmable, allowing users to write and load control programs according to specific application requirements.

Real-time monitoring: Modules are often able to provide real-time data, as well as real-time monitoring and feedback on engine operating parameters.

Fault detection and alarm: It usually has a fault detection function, which can monitor the status of the system and sensors, and trigger alarms when there is a problem, and take timely maintenance measures.

Engine protection: Woodward 2301E 8273-1011 motherboard modules are typically equipped with engine protection features that prevent the engine from operating under abnormal or dangerous conditions and take the necessary measures to protect the engine.

Data logging and historical data analysis: Some modules support data logging, which allows historical data to be recorded for troubleshooting and performance analysis.

Scalability: Modules are typically extensible, allowing users to add additional modules and channels to meet changing control needs.

The Woodward 2301E controls the load distribution and speed of generators powered by diesel or gas engines. (In this manual, these power sources are referred to as "prime movers.") The 2301E is a microprocessor-based digital control designed to include and be compatible with the 2301A and 2301D load sharing controls. The increased software flexibility allows the 2301E to include control functions that would have required additional equipment in previous versions of the 2301A and 2301D control systems. The 2301E is therefore suitable for upgrading existing control systems to add newly installed functionality.

The 2301E 8273-1011 controller is mounted in a sheet metal chassis and consists of a printed circuit board. The 2301E is set up and configured via an external computer connected to a 9-pin connector (RS-232 port) on the front of the control unit.

2301E provides control in synchronous mode, drop mode, or base load mode. The 2301E will allow soft load transfer when added to or removed from the bus.

2301E control hardware includes:

1 load sensor

1 actuator driver

1 microprocessor speed sensor

One analog output can be configured

Two configurable analog inputs

8 discrete (switching) inputs (3 inputs configurable)

4 configurable discrete (relay driver) outputs

2 serial ports (RS-232 and RS-422)