WATLOW-ANAFAZE-997D-11CC-JURG 过程控制器

997D-11CC-JURG wOoDWARD温度/极限/过程控制器

997D11CCJUGG制造商已停产

温度/极限/过程控制器. 1/8德国标准

. 100-240伏交流电

过程控制器是指根据预定顺序改变主电路或控制电路的接线和改变电路中电阻值来控制电动机的启动、调速、制动和反向的主令装置。由程序计数器、指令寄存器、指令译码器、时序产生器和操作控制器组成，它是发布命令的“决策机构”，即完成协调和指挥整个计算机系统的操作。

997D-11CC-JURG过程控制器的主要功能：

1. 数据采集功能：997D-11CC-JURG用于采集被控过程中的各种参数，如温度、压力、流量、液位等。

2. 控制功能：根据被控过程的特性和控制要求，选择合适的控制算法，对被控过程进行控制。

3. 显示功能：997D-11CC-JURG用于显示被控过程的各种参数、控制量、报警信息等。

4. 报警功能：当被控过程出现异常情况时，过程控制器能够发出报警信号。

5. 通信功能：997D-11CC-JURG用于与上位机或其他控制设备进行通信，实现数据传输和共享。

6. 自诊断功能：用于检测过程控制器自身的故障，并采取相应的措施进行修复或报警。

7. 编程功能：用于编写和修改控制程序，以满足不同的控制要求。

8. 记录功能：997D-11CC-JURG用于记录被控过程的历史数据，以便进行数据分析和故障诊断。

过程控制器广泛应用于工业自动化领域，如化工、石油、电力、冶金、造纸等行业，是实现生产过程自动化控制的重要设备之一。

WATLOW-ANAFAZE-997D-11CC-JURG 过程控制器

997D-11CC-JURG wOoDWARD Temperature/Limit/Process controller

The 997D11CCJUGG manufacturer has been discontinued

Temperature/limit/process controller. 1/8 German standard

.100-240 volts AC

The process controller refers to the main command device that changes the wiring of the main circuit or control circuit and changes the resistance value in the circuit to control the start, speed regulation, braking and reverse of the motor according to the predetermined sequence. Composed of program counter, instruction register, instruction decoder, timing generator and operation controller, it is a "decision mechanism" that issues commands, that is, to complete the coordination and command of the operation of the entire computer system.

Main functions of process controller:

1. Data acquisition function: 997D-11CC-JURG is used to collect various parameters in the controlled process, such as temperature, pressure, flow rate, liquid level, etc.

2. Control function: According to the characteristics and control requirements of the controlled process, select the appropriate control algorithm to control the controlled process.

3. Display function: 997D-11CC-JURG is used to display various parameters, control amount, alarm information, etc. of the controlled process.

4. Alarm function: When an abnormal situation occurs in the controlled process, the process controller can send an alarm signal.

5. Communication function: 997D-11CC-JURG is used to communicate with the host computer or other control devices to achieve data transmission and sharing.

6. Self-diagnosis function: used to detect the fault of the process controller itself, and take appropriate measures to repair or alarm.

7. Programming function: used to write and modify the control program to meet different control requirements.

8. Recording function: 997D-11CC-JURG is used to record the historical data of the controlled process for data analysis and fault diagnosis.

Process controller is widely used in the field of industrial automation, such as chemical, petroleum, electric power, metallurgy, paper and other industries, is one of the important equipment to achieve automatic control of production process.