数字控制 5466-318  用于指示设备的电源运行状况

产品描述

5466-318 模块由伍德沃德公司为 MicroNet 数字控制系列设计，设计为三重模块化冗余 （TMR） 内核电源 （PS） 模块。安装此模块后，它将作为三个内核电源之一用于在 MicroNet TMR 系统上运行的应用程序中。安装后，此模块将插入内核部分的第一个插槽中。请注意，在卸下此类模块之前，必须卸下 MicroNet TMR 内核电源中的所有模块。

5466-318 模块的物理构成是金属的，模块的前面板上只有一个 LED。模块面板上的 LED 用于指示设备的电源运行状况。该模块将在来自 MicroNet 主电源的 24 伏直流电源下运行。从MicroNet主电源接收到电源后，它将在内核部分的其余部分将其调节为10 A或5 VDC。

安装 5466-318 后，它可以在许多不同的部分使用，这些部分如下：非危险场所、I 类、A-B-C-D 组和 2 区位置。如果模块安装在上述位置以外的位置，则在操作过程中可能会发生错误。

产品描述

5466-318 模块由伍德沃德公司为 MicroNet 数字控制系列设计，设计为三重模块化冗余 （TMR） 内核电源 （PS） 模块。安装此模块后，它将作为三个内核电源之一用于在 MicroNet TMR 系统上运行的应用程序中。安装后，此模块将插入内核部分的第一个插槽中。请注意，在卸下此类模块之前，必须卸下 MicroNet TMR 内核电源中的所有模块。

5466-318 模块的物理构成是金属的，模块的前面板上只有一个 LED。模块面板上的 LED 用于指示设备的电源运行状况。该模块将在来自 MicroNet 主电源的 24 伏直流电源下运行。从MicroNet主电源接收到电源后，它将在内核部分的其余部分将其调节为10 A或5 VDC。

安装 5466-318 后，它可以在许多不同的部分使用，这些部分如下：非危险场所、I 类、A-B-C-D 组和 2 区位置。如果模块安装在上述位置以外的位置，则在操作过程中可能会发生错误。

数字控制 5466-318  用于指示设备的电源运行状况

Product description

The 5466-318 module was designed by Woodward for the MicroNet digital Control family and is designed as a triple modular Redundant (TMR) core power supply (PS) module. Once this module is installed, it will be used as one of three kernel power supplies in applications running on MicroNet TMR systems. After installation, this module will be inserted into the first slot in the kernel section. Please note that all modules in the MicroNet TMR kernel power supply must be removed before such modules can be removed.

The physical composition of the 5466-318 module is metal, and there is only one LED on the front panel of the module. Leds on the module panel are used to indicate the power health of the device. The module will operate on a 24-volt DC power supply from MicroNet's main power supply. After receiving the power from the MicroNet main power supply, it will adjust it to 10 A or 5 VDC in the rest of the core section.

After installing 5466-318, it can be used in many different sections, which are as follows: non-hazardous sites, Class I, A-B-C-D group, and Zone 2 locations. If the module is installed in a location other than the above, an error may occur during operation.

Product description

The 5466-318 module was designed by Woodward for the MicroNet digital Control family and is designed as a triple modular Redundant (TMR) core power supply (PS) module. Once this module is installed, it will be used as one of three kernel power supplies in applications running on MicroNet TMR systems. After installation, this module will be inserted into the first slot in the kernel section. Please note that all modules in the MicroNet TMR kernel power supply must be removed before such modules can be removed.

The physical composition of the 5466-318 module is metal, and there is only one LED on the front panel of the module. Leds on the module panel are used to indicate the power health of the device. The module will operate on a 24-volt DC power supply from MicroNet's main power supply. After receiving the power from the MicroNet main power supply, it will adjust it to 10 A or 5 VDC in the rest of the core section.

After installing 5466-318, it can be used in many different sections, which are as follows: non-hazardous sites, Class I, A-B-C-D group, and Zone 2 locations. If the module is installed in a location other than the above, an error may occur during operation.