TG-13（8516-038） 调速器   作用是自动调节装置

TG-13（8516-038）调速器是一种自动调节装置，可以根据柴油机负荷的变化，自动增减喷油泵的供油量，使柴油机能够以稳定的转速运行。这种装置已经在工业直流电机调速、工业传送带调速、灯光照明调解、计算机电源散热、直流电扇等领域得到广泛应用。

按其工作原理的不同，调速器可以分为机械式、气动式、液压式、机械气动复合式、机械液压复合式和电子式等多种形式。其中，应用最广的当属机械式调速器，其结构简单，工作可靠，性能良好。

TG-13（8516-038）调速器的作用是自动调节装置，可以根据柴油机负荷的变化，自动增减喷油泵的供油量，使柴油机能够以稳定的转速运行。调速器主要用于减小某些机器非周期性速度波动的自动调节装置，可使机器转速保持定值或接近设定值。

TG-13（8516-038）调速器已经在工业直流电机调速、工业传送带调速、灯光照明调解、计算机电源散热、直流电扇等领域得到广泛应用。

此外，使用调速器时需注意：在雷雨季节，强烈雷击会造成电网不稳定，容易发生晶闸管模块击穿、熔断器烧坏现象，要暂时停止使用设备，待电网稳定后再重新投入使用；电源断开后，吸收电容器上继续携带危险电压，至少2分钟内不要打开调速器。

TG-13（8516-038）调速器和调速开关的主要区别在于，调速器是一种自动调节装置，可以根据柴油机负荷的变化，自动增减喷油泵的供油量，使柴油机能够以稳定的转速运行。而调速开关则是采用电子电路或微处理芯片去改变电机的级数、电压、电流、频率等方法控制电机的转速，以使电机达到较高的使用性能的一种电子开关。

TG-13（8516-038） 调速器   作用是自动调节装置

TG-13 (8516-038) governor is an automatic regulating device, which can automatically increase and decrease the fuel supply of the fuel injection pump according to the change of the diesel engine load, so that the diesel engine can run at a stable speed. This device has been widely used in industrial DC motor speed regulation, industrial conveyor belt speed regulation, lighting mediation, computer power cooling, DC fan and other fields.

According to its different working principle, the governor can be divided into mechanical, pneumatic, hydraulic, mechanical pneumatic compound, mechanical hydraulic compound and electronic and other forms. Among them, the most widely used is the mechanical governor, which has simple structure, reliable work and good performance.

The function of TG-13 (8516-038) governor is an automatic adjustment device, which can automatically increase or decrease the fuel supply of the fuel injection pump according to the change of the diesel engine load, so that the diesel engine can run at a stable speed. The governor is an automatic adjustment device mainly used to reduce the non-periodic speed fluctuations of some machines, which can keep the machine speed at a fixed value or close to the set value.

TG-13 (8516-038) governor has been widely used in industrial DC motor speed regulation, industrial conveyor belt speed regulation, lighting mediation, computer power cooling, DC fans and other fields.

In addition, the use of the governor should pay attention to: in the thunderstorm season, strong lightning strikes will cause instability of the power grid, prone to thyristor module breakdown, fuse burn phenomenon, to temporarily stop using the equipment, to be stable after the power grid and then put into use; After the power is disconnected, the absorption capacitor continues to carry dangerous voltage, do not open the governor for at least 2 minutes.

The main difference between TG-13 (8516-038) governor and speed control switch is that the governor is an automatic adjustment device, which can automatically increase or decrease the fuel supply of the injection pump according to the change of the diesel load, so that the diesel engine can run at a stable speed. The speed control switch is an electronic switch that uses electronic circuits or microprocessing chips to change the motor's series, voltage, current, frequency and other methods to control the motor's speed, so that the motor can achieve higher performance.