输入/输出 200-595-100-014 用于冗余Modbus TCP通信

Vibro-meter 200-595-100-014 200-595-072-122 VM600 CPUM

Vibro-Meter 用于CPUM卡的VM600 IOCN输入/输出卡

VM600 CPUM模块化CPU卡的输入/输出卡。

VM600 CPUM和IOCN模块化CPU卡和输入/输出卡是一对机架控制器和通信接口卡，用作Meggitt振动计产品线的VM600机架机械保护系统(MPS)和/或状态监控系统(CMS)的系统控制器和数据通信网关。

特征

CPUM卡的输入/输出(接口)卡

一个主以太网连接器(8P8C (RJ45))，用于与VM600 MPSx软件和/或Modbus TCP和/或PROFINET通信进行通信

一个辅助以太网连接器(8P8C (RJ45))，用于冗余Modbus TCP通信

一个主要串行连接器(6P6C (RJ11/RJ25))，用于通过直接连接与VM600 MPSx软件通信

VM600机架控制器和通信接口卡。

VM600 CPUM 和 IOCN 模块化 CPU 卡和输入/输出卡是一对机架控制器和通信接口卡，用作美捷特振动计®产品线中 VM600 机架式机械保护系统 （MPS） 和/或状态监测系统 （CMS） 的系统控制器和数据通信网关。

注意：提供不同版本的CPUx/IOCx机架控制器和通信接口卡对，如下所示：

CPUM/IOCN 是带有前面板显示屏的原始版本，支持 Modbus RTU/TCP 或 PROFINET （PNR 200-595-VVV-VVV）。

CPUR/IOCR 是具有机架控制器冗余并支持 Modbus RTU/TCP （PNR 600-007-VVV-VVV） 的版本。

CPUR2/IOCR2 是一个对现场总线数据进行数学处理并支持 Modbus TCP 和 PROFIBUS DP （PNR 600-026-000-VVV） 的版本。

输入/输出 200-595-100-014 用于冗余Modbus TCP通信

Vibro-meter 200-595-100-014 200-595-072-122 VM600 CPUM Spot

Vibro-Meter is used for the VM600 IOCN input/output card of the CPUM card

VM600 CPUM Input/output card of the modular CPU card.

The VM600 CPUM and IOCN modular CPU card and input/output card are a pair of rack controllers and communication interface cards used as system controllers and data communication gateways for the VM600 Rack Mechanical Protection System (MPS) and/or condition monitoring system (CMS) of the Meggitt Vibrometer product line.

trait

CPUM Input/output (interface) card

One main Ethernet connector (8P8C (RJ45)) for communication with VM600 MPSx software and/or Modbus TCP and/or PROFINET communications

An auxiliary Ethernet connector (8P8C (RJ45)) for redundant Modbus TCP communication

A primary serial connector (6P6C (RJ11/RJ25)) for communication with the VM600 MPSx software via a direct connection

VM600 rack controller and communication interface card.

The VM600 CPUM and IOCN modular CPU card and input/output card are a pair of rack controllers and communication interface cards used as the system controller and data communication gateway for the VM600 rack mounted Mechanical Protection System (MPS) and/or condition monitoring system (CMS) in the Meget Vibumeter ® product line.

Note: Different versions of CPUx/IOCx rack controllers and communication interface card pairs are available, as shown below:

CPUM/IOCN is the original version with a front panel display that supports Modbus RTU/TCP or PROFINET (PNR 200-595-VVV-VVV).

CPUR/IOCR is a version with rack controller redundancy and support for Modbus RTU/TCP (PNR 600-007-VVV-VVV).

CPUR2/IOCR2 is a version that performs mathematical processing of fieldbus data and supports Modbus TCP and PROFIBUS DP (PNR 600-026-000-VVV).