VM600 CPUM 200-595-067-114 VIBRO-METER  输入/输出模块

振动计+200-595-067-114 VM600 CPUM

振动计+200-595-067-114VM600 CPUM模块是一款紧凑的多功能监控设备，可轻松集成到现有机器中。它旨在提供准确可靠的机器振动测量，可用于在潜在问题成为严重问题之前检测和诊断它们。该模块非常适合用于各种工业应用，包括制造、石油和天然气以及发电。

产品参数

·输入通道:2

频率范围:2 Hz-10 kHz测量范围: 土50 g

分辨率: 0.001 g

·温度范围:-40℃至+85C·电源:24 VDC

VM6oo CPUM 200-595-067-114 VIBRO-METER产品说明:

VMSO0 CPUM 200595-067-114是一款由瑞士VIBRO-METER公司生产的振动监测系统。该系统采用先进的数字信号处理技术，可实时监测旋转机械的振动情况，包括机械轴承、齿轮、电机等部件的振动情况，从而提供机械故障预警和诊断。

VIBRO-METER VM600 CPUM 200-595-067-114输入/输出模块VM600 CPUM模块化CPU卡的输入/输出卡。

VM60 CPUM和IOCN模块化CPU卡和输入/输出卡是一对机架控制器和通信接口卡，用作Meggit搞动计产品的VM6OC机架机械保护系统(NPS)和或状态监控系统(CMS)的系统控制器和数据通信网关。

特征

CPUM卡的输入/输出(接口)卡

一个主以太网连接器(8P8C(RJ45))，用于与VM600 MPSx软件和/或Modbus TCP和/或PROFINET通信进行通信—个辅助以太网连接器(8P8C(RJ45)),用于冗余Modbus TCP通信

一个主要串行连接器(6P6C(RJ11/R125))，用于通过直接连接与VM600 MPSx软件通信两对串行连接器(6P6C(RJ11/RJ25))，可用于配置VM600机架的多点RS-485网络

这些以及许多其他案例表明。在受约束的IT环境中工作良好的TT安全技术(方形桩)可能在不受约束的OT/控制系统环境(圆孔)中不工作，特别是对于遗留的控制系统设备和通信协议。有一些网络安全工具是专门为在控制系统环境中使用而设计的。效果很好。然而，即使是这些也需要在与旧的传统控制系统—起使用之前进行测li试。

VM600 CPUM 200-595-067-114 VIBRO-METER  输入/输出模块

Vibrometer +200-595-067-114 VM600 CPUM

The +200-595-067-114VM600 CPUM module is a compact, versatile monitoring device that can be easily integrated into existing machines. It is designed to provide accurate and reliable machine vibration measurements that can be used to detect and diagnose potential problems before they become serious problems. The module is ideal for use in a variety of industrial applications including manufacturing, oil and gas, and power generation.

Product parameter

· Input channel :2

Frequency range :2 Hz-10 kHz Measurement range: soil 50 g

Resolution: 0.001g

· Temperature range :-40℃ to +85C· Power supply :24 VDC

VM6oo CPUM 200-595-067-114 VIBRO-METER Product Description:

VMSO0 CPUM 200595-067-114 is a vibration monitoring system produced by the Swiss company VIBRO-METER. The system adopts advanced digital signal processing technology, which can monitor the vibration of rotating machinery in real time, including the vibration of mechanical bearings, gears, motors and other parts, so as to provide mechanical fault warning and diagnosis.

VIBRO-METER VM600 CPUM 200-595-067-114 Input/Output module The input/output card of the VM600 CPUM modular CPU card.

The VM60 CPUM and IOCN modular CPU card and input/output card are a pair of rack controllers and communication interface cards used as system controllers and data communication gateways for VM6OC rack Mechanical Protection systems (NPS) and or condition monitoring systems (CMS) of Meggit operator products.

trait

CPUM Input/output (interface) card

One primary Ethernet connector (8P8C(RJ45)) for communication with VM600 MPSx software and/or Modbus TCP and/or PROFINET communication - one secondary Ethernet connector (8P8C(RJ45)) for redundant Modbus TCP communication

One main serial connector (6P6C(RJ11/R125)) for communication with the VM600 MPSx software via a direct connection two pairs of serial connectors (6P6C(RJ11/RJ25)) can be used to configure the multi-point RS-485 network of the VM600 rack

These and many other cases show. TT security technologies that work well in a constrained IT environment (square pile) may not work in an unconstrained OT/ control system environment (round hole), especially for legacy control system devices and communication protocols. There are a number of cybersecurity tools that are specifically designed for use in a control system environment. It worked very well. However, even these need to be tested before they can be used with older conventional control systems.