TRICONEX-3625A  Triconex 热电偶模块 模拟量输入/输出模块

制造商:Triconex

产品编号:3625

产品类型:数字24VDC输出模块

类型:TMR，监督/非监督DO

输出信号:32，普通

运输重量:4公斤

TRICONEX 3625A 热电偶模块

热电偶输入（TC）模块TRICONEX 3625A 包括三个独立的输入通道。每个输入通道从每个点接收可变电压信号，执行热电偶线性化和冷端补偿，以及将结果转换为摄氏度或华氏的然后，每个通道发送16位有符号整数，表示每计数三次0.125度TRICONEX 3625A 主处理器随需应变。在TMR中模式，然后使用保证中值选择算法每次扫描的正确数据。每个热电偶输入模块可编程以支持从J、K和T中选择的一种热电偶类型用于标准热电偶输入模块和来自J、K、T和E的任何诊断失败通道激活故障指示器，从而激活底盘报警信号。模块故障指示灯仅报告通道故障，而不是模块故障。模块继续最多两个能正常工作故障通道。热电偶输入模块支持热备盘功能允许在线更换故障TRICONEX 3625A 模块。热电偶输入模块需要单独的外部带电缆的终端面板Tricon背板的接口。每个模块都通过机械键连接防止在配置的机箱。

输入/输出模块是什么?

它是可编程控制器PLC与l业生产设备或业生产过程连接的接口。现场的输入号,如按钮开关，行程开关、限位开关以及传感输出的开关量或模

拟量(压力、流量、温度、电压、电流)等,都要通过输入模块送到PLC。

于这些信号电平各式各样，而可编程控制器CPU所处理的信息只能是标准电平,所以输入模块还需将这些信号转换成PLC能够接受和处理的数字信

号。输入模块的作用是接收中央处理器处理过的数字信号，并把它转换成现场执行部件所能接收的控制信号，以驱动如电磁阀、灯光显示、电机等执行机构。可编程控制器有多种输入/输出模块其类型有数字量输入/输出模块

和模拟量输入/输出模块。

TRICONEX-3625A  Triconex 热电偶模块 模拟量输入/输出模块

Manufacturer :Triconex

Product Number :3625

Product type: Digital 24VDC output module

Type :TMR, supervised/unsupervised DO

Output signal :32, normal

Shipping weight :4 kg

TRICONEX 3625A thermocouple module

The thermocouple input (TC) module TRICONEX 3625A consists of three separate input channels. Each input channel receives a variable voltage signal from each point, performs thermocouple linearization and cold-end compensation, and converts the result to degrees Celsius or Fahrenheit. Then, each channel sends a 16-bit signed integer representing 0.125 degrees per count three times. Pattern in TMR and then use the guaranteed median to select the correct data for each scan. Each thermocouple input module is programmable to support a thermocouple type selected from J, K, and T for standard thermocouple input modules and any diagnostic failure channels from J, K, T, and E to activate the fault indicator, thereby activating the chassis alarm signal. The module fault indicator reports only channel faults, not module faults. The module continues to function in a maximum of two fault channels. The thermocouple input module supports the hot spare disk function to replace the faulty TRICONEX 3625A module online. The thermocouple input module requires a separate interface to the external terminal panel with cable Tricon backplane. Each module is connected by mechanical keys to prevent in the configured chassis.

What is the input/output module?

It is the interface between the programmable controller PLC and the production equipment or the production process. Field input numbers, such as push button switches, travel switches, limit switches, and switch quantities or modes of sensing outputs

Pseudo quantities (pressure, flow, temperature, voltage, current), etc., are sent to the PLC through the input module.

These signal levels are various, and the information processed by the programmable controller CPU can only be the standard level, so the input module also needs to convert these signals into digital messages that the PLC can accept and process

number The function of the input module is to receive the digital signal processed by the central processor and convert it into reality

The control signal that can be received by the field actuator to drive the actuator such as solenoid valve, light display, motor, etc. Programmable controllers have a variety of input/output modules and their types are digital input/output modules

And analog input/output modules.