GV7-RS150 电机断路器  具有短路保护、过载保护

施耐德电气GV7RS150

TeSys GV7 手动起动器和保护器， 热磁电路保护器， 摇杆， 3 P， AC-3， 90...150 A， 

GV7RS150是Schneider Electric公司的TeSys GV7R电机断路器。它确保对 55-75kW@400V 电机的热磁保护，具有高分断能力 Icu 70kA。通过摇杆进行启停控制，保证 20 000 次循环 AC-3 415V。 GV7RS150 是 Schneider Electric 的 TeSys GV7R 电机断路器，专为 55-75kW@400V 电机应用而设计。它实现了热磁保护，热设置范围为 90-150A，磁跳闸为 12-14xIn，分断能力 Icu 70kA@400V。通过摇杆进行启停控制，保证 20 000 次循环 AC-3 415V。它在全球范围内可用，已通过多标准认证（IEC、UL、CSA、船舶）。在单个设备中完成电机保护，短路，过载，断开。与 TeSys 接触器相关联，它确保了完整的 1 类或 2 类电机启动器解决方案。适用于大型工业或建筑低压配电网络，这要归功于 70kA 的高分断能力。带螺丝夹端子的电源连接。手动控制，带摇杆，用于启动/停止，可带附件 （GV7V） 挂锁。可集成辅助触点（GV7AB、GV7AD、GV7AE），用于状态和跳闸信号。可集成欠压或并联脱扣单元（GV7AU、GV7AS）。

电机断路器是一种用于保护电动机的断路器。它通常安装在电动机的供电线路上，用于在电动机发生短路、过载或其他故障时切断电源，以保护电动机和其他电气设备。

GV7RS150电机断路器通常具有短路保护、过载保护和欠压保护等功能。当电动机发生短路或过载故障时，电机断路器会自动切断电源，以避免电动机和其他电气设备受到损坏。同时，电机断路器还可以提供欠压保护，以避免电动机在低电压下运行，从而延长电动机的使用寿命。

在选择电机断路器时，需要考虑电动机的额定电流、电压、功率等参数，以确保电机断路器能够正确地保护电动机。同时，还需要考虑电机断路器的额定电流、短路分断能力、过载保护特性等参数，以确保电机断路器能够满足系统的要求。

总之，GV7RS150电机断路器是一种用于保护电动机的重要设备，它可以在电动机发生故障时自动切断电源，以保护电动机和其他电气设备。在选择电机断路器时，需要考虑电动机的参数和系统的要求，以确保电机断路器能够正确地保护电动机。

GV7-RS150 电机断路器  具有短路保护、过载保护

Schneider Electric GV7RS150

TeSys GV7 Manual Starter and Protector, Thermomagnetic circuit Protector, rocker, 3P, AC-3, 90... 150 A,

The GV7RS150 is a TeSys GV7R motor circuit breaker from Schneider Electric. It ensures thermal and magnetic protection for 55-75kW@400V motors and has a high breaking capacity of Icu 70kA. Start and stop control with rocker ensures 20 000 cycles of AC-3 415V. The GV7RS150 is Schneider Electric's TeSys GV7R motor circuit breaker designed for 55-75kW@400V motor applications. It implements thermal magnetic protection, thermal setting range is 90-150A, magnetic trip is 12-14xIn, and breaking capability is Icu 70kA@400V. Start and stop control with rocker ensures 20 000 cycles of AC-3 415V. It is available worldwide and has been certified to multiple standards (IEC, UL, CSA, ships). Complete motor protection, short circuit, overload, disconnect in a single device. Associated with TeSys contactors, it ensures a complete Class 1 or Class 2 motor starter solution. Suitable for large industrial or building low-voltage distribution networks, thanks to a high breaking capacity of 70kA. Power connection with screw clamp terminals. Manual control with rocker for start/stop, available with attachment (GV7V) padlock. Auxiliary contacts (GV7AB, GV7AD, GV7AE) can be integrated for status and trip signals. Undervoltage or parallel trip units (GV7AU, GV7AS) can be integrated.

A motor circuit breaker is a circuit breaker used to protect an electric motor. It is usually installed on the power supply line of the motor and is used to cut off the power supply in case of a short circuit, overload or other failure of the motor to protect the motor and other electrical equipment.

The GV7RS150 motor circuit breaker usually has the functions of short circuit protection, overload protection and undervoltage protection. When the motor has a short circuit or overload fault, the motor circuit breaker will automatically cut off the power to avoid damage to the motor and other electrical equipment. At the same time, the motor circuit breaker can also provide undervoltage protection to avoid the motor running at low voltage, thus extending the service life of the motor.

When selecting the motor circuit breaker, it is necessary to consider the rated current, voltage, power and other parameters of the motor to ensure that the motor circuit breaker can correctly protect the motor. At the same time, it is also necessary to consider the rated current of the motor circuit breaker, short circuit breaking capacity, overload protection characteristics and other parameters to ensure that the motor circuit breaker can meet the requirements of the system.

In short, the GV7RS150 motor circuit breaker is an important device used to protect the motor, which can automatically cut off the power when the motor fails to protect the motor and other electrical equipment. When selecting the motor circuit breaker, it is necessary to consider the parameters of the motor and the requirements of the system to ensure that the motor circuit breaker can correctly protect the motor.