SD326DU25S2  伺服驱动器  驱动元件类型为机电

SD326DU25S2施耐德电气运动控制步进电机驱动

制造商:施耐德电气

产品编号:SD326DU25S2

·产品类型:运动控制步进电机驱动

·电源电压限值:100...120 V/ 200...240 V

SD326DU25S2是一种伺服驱动器，其功能是位置伺服，驱动元件类型为机电，控制方式为闭环，额定电压为220V，产品认证为CE、UL，速度响应频率为200KHz，加工定制为否，外形尺寸为210mm，重量为2kg，控制方式为脉冲，工作温度为-40~+50度，真空使用为可以，电流为4A。

控制器的基本功能是从主存中取出一条指令，并指出下一条指令在主存中的位置；对指令进行译码或测试，产生相应的操作控制信号，以便启动规定的动作；指挥并控制CPU、主存、输入和输出设备之间的数据流动方向。

SD326DU25S2控制器的工作原理是根据指令的要求，当前的时序及外部和内部的状态，按时间的顺序发送一系列微操作控制信号。

伺服驱动器又称为“伺服控制器”、“伺服放大器”，是用来控制伺服电机的一种控制器，其作用类似于变频器作用于普通交流马达，属于伺服系统的一部分，主要应用于高精度的定位系统。一般是通过位置、速度和力矩三种方式对伺服电机进行控制，实现高精度的传动系统定位，是传动技术的高端产品。

SD326DU25S2伺服驱动器是由电路板、微芯片、电线和连接器制成的电子设备。它们连接到电机上，以控制电机的旋转。它们可以使电机加速、减速、停止，甚至随时倒退。这是通过控制和引导电机电线的电流来实现的。如果没有伺服驱动器，电机可能无法控制地旋转或根本不旋转。

SD326DU25S2  伺服驱动器  驱动元件类型为机电

SD326DU25S2 Schneider Electric motion control stepper motor drive

Manufacturer: Schneider Electric

Product Number :SD326DU25S2

· Product type: motion control stepper motor drive

· Power supply voltage limit :100... 120 V/ 200... 240 V

SD326DU25S2 is a servo driver, its function is position servo, the type of drive component is electromechanical, the control mode is closed loop, the rated voltage is 220V, the product certification is CE, UL, the speed response frequency is 200KHz, the machining customization is no, the external size is 210mm, the weight is 2kg, the control mode is pulse, and the control mode is 220V. The operating temperature is -40~+50 degrees, the vacuum can be used, and the current is 4A.

The basic function of the controller is to take out an instruction from main memory and point out the position of the next instruction in main memory. Decode or test instructions to generate corresponding operational control signals in order to initiate specified actions; Direct and control the direction of data flow between CPU, main memory, input and output devices.

The working principle of the SD326DU25S2 controller is to send a series of microoperation control signals in the order of time according to the requirements of the instruction, the current timing and the external and internal state.

Servo driver is also known as "servo controller", "servo amplifier", is used to control the servo motor of a controller, its role is similar to the frequency converter acting on the ordinary AC motor, is a part of the servo system, mainly used in high-precision positioning system. Generally, the servo motor is controlled through three ways of position, speed and torque to achieve high-precision transmission system positioning, which is a high-end product of transmission technology.

SD326DU25S2 servo drivers are electronic devices made of circuit boards, microchips, wires and connectors. They are attached to the motor to control its rotation. They can make the motor speed up, slow down, stop, and even go backwards at any time. This is achieved by controlling and directing the current of the motor wires. Without a servo drive, the motor may spin uncontrollably or not at all.