140DAO85300C  交流分立式输出模块  具有每点 1 A 的群熔器配置

零件编号：140DAO85300C

制造者：施耐德电气

类型： I/O 模块

模块格式 ：标准

质保：1年

产品或组件类型：交流分立式输出模块

离散输出数：32

频道组：4 组，每组 8 个通道

电源频率 ：47...63 赫兹

电压降 ：1.5 伏

140DAO85300C 施耐德电气分立输出模块是 Quantum with Concept 和 ProWORX 系统的一个组件。它共有 32 个频道，每组有 8 个点。该模块需要 1 A 的总线电流才能正常工作。其特点之一是它具有每点 1 A 的群熔器配置。它还具有 24 的 I/O AC 输出和 230 Vac 的功能电压。这些产品在法国制造，专为物料搬运、包装和纺织机械使用而设计。它们提供 MRO Electric 的 2 年保修。我们还提供来自其他制造商的 I/O 模块，例如 Modicon 和 ABB。

140DAO85300C 的规格

该模块的规格包括 32 个输出点，分为四个 8 点熔断器组。该模块还具有编号为 1 至 32 的有源 LED，具有绿色指示点状态。它需要 2 个单词才能解决。工作电压范围为 20 至 253 Vac，绝对最大值为 300 Vac 持续 10 秒，400 Vac 持续 1 个周期。该模块的工作频率在 47 至 63 Hz 之间。每点导通状态压降为1.5 Vac，最小负载电流为10 mA电阻。每个点的最大负载电流为 1 A（连续），20 至 253 Vac rms，每组最大 4 A。根据降额图，该模块的最大连续电流为 16 A。

该模块具有每个点的最大关断状态泄漏，该泄漏值因工作电压而异。最大关断态泄漏在230 Vac时为2.0 mA，在115 Vac时为1.1 mA，在48 Vac时为0.4 mA，在24 Vac时为0.2 mA。模块的最大浪涌电流由循环次数决定。对于一个周期，它可以达到每点 15 A。对于两个周期，浪涌电流最大值为每点 12 A。对于三个周期，最大浪涌电流为每点 8 A。

Modicon 140DAO85300C 的特点

该模块的响应时间为 0.50，最大值为一个生产线周期，适用于 OFF-ON 和 ON-OFF 转换。它还具有用于输出保护的内部 RC 缓冲器保护。

对于组间和输出到总线配置，模块的隔离为 1780 Vac，持续 1 分钟。

该模块需要 320 mA 的总线电流，功耗为 1.60W + 1.0 x 模块总负载电流。不需要外部电源。该模块有保险丝位置，保险丝是内部的，每组有一个 4 A、250 V 保险丝（小保险丝 217004）。

Part number: 140DAO85300C

Manufacturer: Schneider Electric

Type: I/O module

Module format: Standard

Warranty: 1 year

Product or component type: AC discrete output module

Discrete output: 32

Channel group: 4 groups, each group 8 channels

Power frequency: 47... 63 Hertz

Voltage drop: 1.5 volts

The 140DAO85300C Schneider Electric Discrete Output module is a component of Quantum with Concept and ProWORX systems. It has a total of 32 channels, each with 8 points. The module requires 1 A bus current to work properly. One of its characteristics is that it has A group fuse configuration of 1 A per point. It also has 24 I/O AC output and a functional voltage of 230 Vac. Manufactured in France, these products are designed for material handling, packaging and textile machinery use. They come with a 2-year warranty on the MRO Electric. We also offer I/O modules from other manufacturers such as Modicon and ABB.

Specifications of 140DAO85300C

The specifications of the module include 32 output points divided into four 8-point fuse groups. The module also has active leds numbered 1 to 32 with a green indicating point status. It takes 2 words to solve. The operating voltage ranges from 20 to 253 Vac, with an absolute maximum of 300 Vac for 10 seconds and 400 Vac for 1 cycle. The module operates at frequencies between 47 and 63 Hz. The on-state voltage drop per point is 1.5 Vac and the minimum load current is 10 mA resistor. The maximum load current at each point is 1 A (continuous), 20 to 253 Vac rms, with A maximum of 4 A per group. According to the derating diagram, the maximum continuous current of the module is 16 A.

The module has a maximum off state leakage at each point, which varies depending on the operating voltage. The maximum off state leakage is 2.0 mA at 230 Vac, 1.1 mA at 115 Vac, 0.4 mA at 48 Vac, and 0.2 mA at 24 Vac. The maximum surge current of the module is determined by the number of cycles. For one cycle, it can reach 15 A per point. For two cycles, the maximum surge current is 12 A per point. For three cycles, the maximum surge current is 8 A per point.

Features of Modicon 140DAO85300C

The module has a response time of 0.50, a maximum of one production line cycle, and is suitable for OFF-ON and ON-OFF conversions. It also has internal RC buffer protection for output protection.

For intergroup and output-to-bus configurations, module isolation is 1780 Vac for 1 minute.

The module requires a bus current of 320 mA with a power consumption of 1.60W + 1.0x total load current of the module. No external power supply is required. The module has A fuse position, the fuse is internal, each group has a 4 A, 250 V fuse (small fuse 217004).