140ACI04000C  模拟量输入模块  提供模拟量转485功能

产品系列

型号：140ACI04000C

产品类型：模拟量输入模块

过滤器类型

单极低通 -3 dB在15 Hz +/- 20%

模拟量输入数量：8

输入类型：差分

地址需求：9 输入字

模拟量输入分辨率：12 bits

线性测量范围：1...5 V，4...20 mA

绝对最大输入：50 V 直流，25 mA

输入阻抗

250 Ω 电流 +/- 0.01 %

> 20 MΩ 电压

绝对准确度误差：

+/- 0.05 %满量程

+/- 0.1 %最大满量程

线性度误差：+/- 0.04 %

温度偏移精度：

+/- 0.0025 % 满量程/°C

<= 0.005 % 满量程/°C

140ACI04000C模拟量输入模块是一款将远程现场的模拟量信号采集至计算机的设备，其利用RS-485总线作为数据通信线路，提供模拟量转485功能，能够同时将模拟量输入至模块，并通过RS-485总线传输至计算机。

140ACI04000C模拟量是表示在一定范围内连续变化的任意取值，跟数字量是相对立的一个状态表示。通常模拟量用于采集和表示事物的电压电流或者频率等参数。模拟量输入模块能够采集模拟量（如电压、电流、热电偶、热电阻、温度等数值）并通过485总线传输到电脑上。由于采用RS-485接口作为通信接口，它能够多个模块组合传输更多路数模拟量信号，并且能够在485线路上分散配置，采用地址码进行区分，可以直接接入MODBUS RTU协议的组态软件。

Product series

Model: 140ACI04000C

Product type: Analog input module

Filter type

Unipolar low-pass -3 dB at 15 Hz +/ -20%

Analog input quantity: 8

Input type: differential

Address requirement: 9 Enter a word

Analog input resolution: 12 bits

Linear measuring range: 1... Five V, four... 20 mA

Absolute maximum input: 50 V DC, 25 mA

Input impedance

250Ω current +/- 0.01%

> 20 MΩ voltage

Absolute accuracy error:

+/- 0.05 % full scale

+/- 0.1% maximum full scale

Linearity error: +/ -0.04%

Temperature deviation accuracy:

+/- 0.0025% full scale /°C

<= 0.005% full scale /°C

140ACI04000C analog input module is a remote field analog signal acquisition to the computer equipment, the use of RS-485 bus as a data communication line, to provide analog to 485 function, can simultaneously input analog to the module, and through the RS-485 bus transmission to the computer.

140ACI04000C Analog quantity is an arbitrary value that indicates continuous change within a certain range, and is opposed to a state representation of the digital quantity. Analog quantities are usually used to capture and represent parameters such as voltage, current or frequency of things. Analog input module can collect analog values (such as voltage, current, thermocouple, thermal resistance, temperature, etc.) and transmit to the computer through the 485 bus. As the RS-485 interface is used as the communication interface, it can combine multiple modules to transmit more analog signals, and can be distributed on the 485 line, using the address code to distinguish, and can directly access the configuration software of MODBUS RTU protocol.