MVI56E-MCMR ProSoft  技术通信模块 单槽模块

MVI56E-MCMR是一个ProSoft技术通信模块，一个Allen-Bradley inclusive合作伙伴公司。该模块支持MODBUS串行/ASCII通信，并配有双RS232串行应用端口。这些端口支持RS232/RS485和RS422电气标准，波特率可配置为110波特至115.2 kbps。  可接受的串行设置包括无、奇数或偶数奇偶校验、数据位5、6、7和8;停止位为1或2，RTS开/关延迟为O-65535毫秒。  该模块还带有一个RJ45以太网端口形式的调试/配置端口。  该端口支持10/100 base-T传输速度，具有链路和活动LED指示灯以及自动交叉电缆检测。

MVI56E-MCMR是一个单槽模块，可直接安装到任何1756机箱上。

要配置模块操作和参数，可以使用ProSoft Configuration Builder(PCB)和产品发现服务(PDS)。

单槽模块是一种具有模块化设计、可扩展、可重复利用等特点的工业自动化控制系统及仪表。

单槽模块是一种通用的插槽，可以插入不同功能的模块，实现不同功能的应用。这种设计可以方便地根据实际需求进行组合和扩展，提高设备的灵活性和可维护性。单槽模块通常采用标准化的接口和协议，使得不同厂商的产品可以相互兼容，方便用户进行选择和组合。同时，单槽模块的设计也可以方便地对设备进行升级和维护，延长设备的使用寿命。

随着数据块的减少，MVI56E-MCMR需要更少的背板/网络带宽，并支持更简单的调度和通过控制网络的传输。  此外，当与ControlNet通信适配器和冗余控制器一起使用时，简化的数据块实际上用于远程机箱安装。

要安装Prosoft MVl56E-MCMR模块，用户必须有一个Allen-Bradley ControlLogix处理器，在机架上有一个用于Modbus模块的空闲插槽，并有800 mA的可用电源和5伏DC背板电源。  该设备还需要来自24伏DC电源的额外3 mA电流。  这种增强型Modbus主/从通信模块可以在-40至85摄氏度(-40至185华氏度)的温度范围内储存，但只能在0至60摄氏度(32至140华氏度)的温度范围内使用。  对于MVI56E-MCMR和处理器之间的数据传输，使用样本梯形指令或附加指令。  在设备的前上方，有一个滚动的LED显示屏，显示4个字符，以简单的英语显示状态和诊断信息。  该模块有一个CF卡选项，用于存储所有用户的配置设置。  通过这种方式，用户可以用新模块替换有缺陷的模块，并从CF卡中快速现场传输所有设置和数据。

我们拥有大量工业控制系统备件库存。 制造商涵盖广泛，也与广泛的供应商合作。

快速发货，为您提供佳解决方案，满足您的紧急需求

如果我们没有您需要的库存请求报价，我们通常可以为您找到。 我们的服务

快速的全球交付

超过551,867种独特的产品可供选择

保证市场上优惠的价格

经过功能测试的产品

超过5.000个品牌可供选择

每件物品都经过精心处理并全面运作

MVI56E-MCMR ProSoft  技术通信模块 单槽模块

The MVI56E-MCMR is a ProSoft technology communication module, an Allen-Bradley inclusive partner company. The module supports MODBUS serial /ASCII communication and is equipped with dual RS232 serial application ports. These ports support the RS232/RS485 and RS422 electrical standards and can be configured with a baud rate from 110 baud to 115.2 kbps. Acceptable serial Settings include none, odd or even parity, data bits 5, 6, 7, and 8; The stop bit is 1 or 2, and the RTS on/off delay is O-65535 ms. The module also comes with a debugging/configuration port in the form of an RJ45 Ethernet port. The port supports 10/100 base-T transfer speeds, has link and active LED indicators, and automatic cross-cable detection.

The MVI56E-MCMR is a single slot module that can be installed directly into any 1756 chassis.

To configure module operations and parameters, you can use ProSoft Configuration Builder(PCB) and Product Discovery Service (PDS).

Single slot module is a kind of industrial automation control system and instrument with modular design, extensibility and reuse.

A single-slot module is a universal slot that can insert modules with different functions to achieve applications with different functions. This design can be easily combined and expanded according to actual needs, improving the flexibility and maintainability of the equipment. Single-slot modules usually adopt standardized interfaces and protocols, so that products from different manufacturers can be compatible with each other, and it is convenient for users to choose and combine. At the same time, the design of the single-slot module can also facilitate the upgrade and maintenance of the equipment, and extend the service life of the equipment.

With fewer data blocks, the MVI56E-MCMR requires less backplane/network bandwidth and supports simpler scheduling and transmission through the control network. In addition, when used with ControlNet communication adapters and redundant controllers, simplified data blocks are actually used for remote chassis installation.

To install the Prosoft MVl56E-MCMR module, users must have an Allen-Bradley ControlLogix processor, a free slot in the rack for Modbus modules, and an 800 mA available power supply and a 5 volt DC backplane power supply. The device also requires an additional 3 mA of current from a 24-volt DC power supply. This enhanced Modbus master/slave communication module can be stored in a temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit), but can only be used in a temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). For data transfer between the MVI56E-MCMR and the processor, sample ladder instructions or additional instructions are used. On the top front of the device, there is a scrolling LED display with 4 characters showing status and diagnostic information in plain English. The module has a CF card option to store configuration Settings for all users. In this way, users can replace defective modules with new ones and quickly transfer all Settings and data on-site from the CF card.

We have a large inventory of spare parts for industrial control systems. Manufacturers cover a wide range and also work with a wide range of suppliers.

Fast delivery to provide you with the best solution to meet your urgent needs

If we don't have the inventory you need to request a quote, we can usually find it for you. Our Services

Fast global delivery

Over 551,867 unique products to choose from

Guarantee favorable prices in the market

Functionally tested products

Over 5.000 brands to choose from

Every item is carefully treated and fully operational