PLX32-EIP-SIE PROSOFT 数字输出

 PLX32-EIP-SIE  PROSOFT 数字输出

ProSoft Technology的EtherNet/IP to Siemens工业以太网通信网关允许在Rockwell Automation PACs和Siemens S7 PACs之间进行高速双向数据传输。两个独立的以太网端口允许每个协议驻留在不同的子网上，允许您在两个子网之间传递数据，而无需更改每个设备的IP地址。此外，该网关包括一个嵌入式EDS附加配置文件，可简化集成并缩短调试时间。两个独立的以太网端口允许每种协议驻留在不同的子网上。这允许您在两个子网之间传递数据，而无需将每个设备的IP地址都更改到同一子网。优先级:多个I/O连接允许您为状态和/或控制数据设置rpi。包括嵌入式EDS附加配置文件，简化了集成并减少了调试时间。网关包括一个SD卡插槽(SD卡可选)，用于存储配置文件。这可用于灾难恢复。通过模块开关保护模块配置(1.04版及更高版本)。多达10，000个16位寄存器可用于交换大量数据。

 PLX32-EIP-SIE  PROSOFT 数字输出

The EtherNet/IP to Siemens industrial Ethernet communication gateway of ProSoft Technology allows high-speed bidirectional data transmission between Rockwell Automation PACs and Siemens S7 PACs. Two independent Ethernet ports allow each protocol to reside on a different subnet, allowing you to transfer data between two subnets without changing the IP address of each device. In addition, the gateway includes an embedded EDS additional configuration file, which can simplify integration and shorten debugging time. Two independent Ethernet ports allow each protocol to reside on a different subnet. This allows you to transfer data between two subnets without changing the IP address of each device to the same subnet. Priority: Multiple I/O connections allow you to set rpi for status and/or control data. Includes embedded EDS additional configuration file, which simplifies integration and reduces debugging time. The gateway includes an SD card slot (SD card is optional) for storing configuration files. This can be used for disaster recovery. Protect the module configuration (version 1.04 and later) through the module switch. Up to 10,000 16-bit registers can be used to exchange large amounts of data.