MVI56-DFCMR-DF1  通信模块  兼容的设备和主机接口

型号：MVI56-DFCMR-DF1

描述

背板电流负载：800毫安@ 5v DC3mA @ 24v Dc

工作温度：0至60°C(32至140°F)

储存温度：-40至85°C(-40至185°F)

减少数据块的MVI56-DFCMR-DF1主/从通信模块允许ControlLogix处理器轻松地与其他Modbus协议兼容设备接口。

兼容的设备不仅包括Modicon plc(都支持Modbus协议)，还包括各种各样的终端设备。

该模块使用一个小的lO数据区用于模块和ControlLogix处理器之间的数据传输，使其成为理想的

ControlNet或以太网应用程序与远程机架中的模块。

特点和优点

MVI56-DFCMR-DF1主/从通信模块具有减少的数据块，旨在允许ControlLogix处理器轻松地与Modbus协议兼容的设备和主机接口。该模块充当modbus网络和ControlLogix处理器之间的输入/输出模块。从处理器到Modbus网络的数据传输是异步的。模块中一个5000字的寄存器空间在处理器和Modbus网络之间交换数据。

许多主机SCADA应用程序支持Modbus协议，而通常支持该协议的设备包括一些plc，以及市场上的许多其他第三方设备。(有关支持Modbus的设备的部分列表，请访问ProSoft Technology网站的prosofttesting部分)。

通用规范。

MVI56-DFCMR-DF1 单槽- ControlLogix背板兼容专为远程机架实现而设计

该模块被识别为输入/输出模块，并可以访问处理器内存进行数据传输

梯形逻辑用于模块和处理器之间的数据传输。包括梯子示例文件

配置数据从下载到模块的配置文件中获取。包括样例配置文件

MVI56-DFCMR-DF1  通信模块  兼容的设备和主机接口

Model: MVI56-DFCMR-DF1

Description

Backplane current load: 800 MA @ 5v DC3mA @ 24v Dc

Operating temperature: 0 to 60°C(32 to 140°F)

Storage temperature: -40 to 85°C(-40 to 185°F)

The reduced data block of the MVI56-DFCMR-DF1 master/slave communication module allows the ControlLogix processor to easily be compatible with other Modbus protocol device interfaces.

Compatible devices include not only Modicon PLCS (which all support the Modbus protocol), but also a wide variety of terminal devices.

The module uses a small lO data area for data transfer between the module and the ControlLogix processor, making it ideal

ControlNet or Ethernet applications with modules in the remote rack.

Features and advantages

The MVI56-DFCMR-DF1 master/slave communication module features reduced data blocks designed to allow ControlLogix processors to easily work with Modbus protocol-compatible devices and host interfaces. This module acts as an input/output module between the modbus network and the ControlLogix processor. The data transfer from the processor to the Modbus network is asynchronous. A 5,000-word register space in the module exchanges data between the processor and the Modbus network.

Many host SCADA applications support the Modbus protocol, and devices that typically support the protocol include some PLCS, as well as many other third-party devices on the market. (For a partial list of devices that support Modbus, visit the prosofttesting section of the ProSoft Technology website).

General specifications.

The MVI56-DFCMR-DF1 Single-slot ControlLogix backplane is compatible and designed for remote rack implementations

This module is recognized as an input/output module and has access to processor memory for data transfer

Ladder logic is used for data transfer between modules and processors. Includes a ladder example file

The configuration data is obtained from the configuration file downloaded to the module. Include sample configuration files