PROSOFT-AN-X2-AB-DHRIO 驱动器  最多支持32个远程I/O机架

AN-X2-AB-DHRIO 网关的设计是为了帮助客户发起阶段性迁移方法来替换或升级传统的远程 I/O PLC、HMI、驱动器或 Flex I/O 适配器。这些解决方案可以通过在初始配置期间选择相应的操作模式来实现。AN-X2-AB-DHRIO 有一个内置的 Web 服务器，可以显示诊断数据、配置、上传配置文件和设置操作模式。模式支持升级旧版本的Allen Bradley远程I/O驱动转换成EtherNet/IP驱动。

• 无需改变PLC 代码

• 最多支持4路以态网驱动

• 可配置1 / 4，1 / 2和全机架寻址

• 支持PowerFlex驱动以态网通讯

模式支持升级旧版本的Allen Bradley远程I/O驱动转换成PanelView Plus, PanelView Plus 6 或者 PanelView 

Plus 7 EtherNet/IP.

• 无需改变PLC 代码

• 在同一网段最多支持8台PanelViews 

• 支持在PLC5 or SLC网络中将DH+ 转换升级成EtherNet/IP PanelViews 

模式支持升级旧版本的Allen Bradley远程I/O系统转换成ControlLogix 或者CompactLogix 系列PAC而无需替代已存在的I/O支架。

• 建立新系统无需中断已存在控制, 减少停机时间

• 最多支持32个远程I/O机架

• 支持所有远程I/O波特率(57.6, 115.2, and 230.4 K baud), 远程I/O地址从0至76 

• 兼容ControlLogix和CompactLogix系统

• 自动配置软件搜索波特率分配离散I/O降低配置风险

PROSOFT-AN-X2-AB-DHRIO 驱动器  最多支持32个远程I/O机架

The AN-X2-AB-DHRIO gateway is designed to help customers initiate a phased migration approach to replace

Replace or upgrade a traditional remote I/O PLC, HMI, drive, or Flex I/O adapter. these

The solution can be implemented by selecting the appropriate mode of operation during initial configuration. AN-X2-

AB-DHRIO has a built-in Web server that can display diagnostic data, configuration, and on

Pass configuration files and set operating modes.

The mode supports upgrading the Allen Bradley remote I/O driver of an earlier version to an EtherNet/IP driver.

• No need to change PLC code

• Supports a maximum of four state network drivers

• 1/4, 1/2 and full rack addressing available

• Support PowerFlex driver to state network communication

Mode The Allen Bradley remote I/O driver of an earlier version can be upgraded to PanelView Plus, PanelView Plus 6, or PanelView

Plus 7 EtherNet/IP.

• No need to change PLC code

• A maximum of eight PanelViews can be configured on the same network segment

• Support DH+ conversion to EtherNet/IP PanelViews on PLC5 or SLC networks

Mode supports upgrading older versions of Allen Bradley remote I/O systems to ControlLogix or CompactLogix series PACs without replacing existing I/O mounts.

• Build new systems without interrupting existing controls, reducing downtime

• Supports up to 32 remote I/O racks

• Supports all remote I/O baud rates (57.6, 115.2, and 230.4 K baud), and remote I/O addresses from 0 to 76

• Compatible with ControlLogix and CompactLogix systems

• Automatically configure software to search for baud rate and assign discrete I/O to reduce configuration risk