AN-X2-AB-DHRIO网关旨在帮助客户启动一种分阶段迁移的方法,用于替换或升级旧的RemoteI/O PLC、HMI、驱动器或Flex/O适配器。这些解决方案可以是通过在初始阶段选择相应的操作模式来实现配置AN-X2-AB-DHRIO有一个内置的web服务器,可以显示诊断数据、配置、上传配置文件,以及设置操作模式。注意:现在支持SLC网络上的DH+迁移。一些PLC可能需要更改代码,请参阅TN143269-001 DH+至EIP PVSLC网络的迁移pdtf获取更多信息。
此模式支持将Remote/0上的旧Allen-Bradley驱动器升级为新的启用EtherNet/IP的驱动器。
●无需更改PLC代码
●最多支持4个EtherNetIP驱动器
●可配置1/4、1/2和全机架寻址
●支持EtherNetIP上的所有PowerFlex驱动器
●
The AN-X2-AB-DHRIO gateway is designed to assist customers in initiating a phased migration method for replacing or upgrading old Remote I/O PLCs, HMIs, drives, or Flex/O adapters. These solutions can be achieved by selecting the corresponding operation mode in the initial stage to configure AN-X2-AB-DHRIO. There is a built-in web server that can display diagnostic data, configure, upload configuration files, and set the operation mode. Note: DH+migration on SLC networks is now supported. Some PLCs may require code changes, please refer to the migration pdtf from TN143269-001 DH+to EIP PVSLC network for more information.
This mode supports upgrading old Allen Bradley drives on Remote/0 to new EtherNet/IP enabled drives.
● No need to change PLC code
● Supports up to 4 EtherNetIP drives
●Configurable for 1/4, 1/2, and full rack addressing
● Supports all PowerFlex drives on EtherNetIP
Copyright © 2022-2024 厦门雄霸电子商务有限公司 版权所有 备案号:闽ICP备14012685号-33