MTR-3F-215  变压器   对电网的干扰低，可靠性高

MTR-3F-215变压器具有以下规格:

额定功率:215kva

阶段:三相

频率:50/ 60hz

电压比:11/0.4 kV

矢量组:Dyn11

标准:IEC/EN/IS

MTR-3F-215 变压器是一种利用电磁感应原理改变交流电压的装置，主要构件包括初级线圈、次级线圈和铁芯（磁芯）。变压器的主要功能包括电压变换、电流变换、阻抗变换、隔离、稳压（磁饱和变压器）等。

MTR-3F-215 变压器按用途可以分为配电变压器、电力变压器、全密封变压器、组合式变压器、干式变压器、油浸式变压器、单相变压器、电炉变压器、整流变压器、电抗器、抗干扰变压器、防雷变压器、箱式变电器试验变压器、转角变压器、大电流变压器、励磁变压器等。变压器是输配电的基础设备，广泛应用于工业、农业、交通、城市社区等领域。

MTR-3F-215变压器的优点主要包括：

安全可靠：电压变换比例精确，余耗特别低，稳定性好，电流影响小，对电网的干扰低，可靠性高。

适用性强：具有多功能，可靠性高，能在各种恶劣条件下长期运行不间断。

尺寸小：相比传统的变压器小太多，结构紧凑，便于运输，搬运和安装。

损耗少效益高：因为铜线和硅钢片用量减少，在同样的电流密度及磁通密度时，变压器的铜损和铁损都比双绕组变压器减少，因此效益较高。

提高极限制造容量：变压器极限制造容量一般受运输条件的限制，在相同的运输条件下，变压器容量可比双绕组变压器制造大一些。

然而，变压器也存在一些缺点：

价格较高：由于其具有特殊功能，结构复杂，外部保护要求高，因此价格较高。

寿命不长：由于其结构复杂，功能实现技术和装配过程复杂，其使用寿命相对较短。

运转噪音较大：变压器中的某些齿轮运转噪音较大，会影响电力设备运行环境。

综上所述，MTR-3F-215变压器具有安全可靠、适用性强、尺寸小、损耗少效益高、提高极限制造容量等优点，但同时存在价格较高、寿命不长、运转噪音较大等缺点。

MTR-3F-215  变压器   对电网的干扰低，可靠性高

MTR-3F-215 transformers have the following specifications:

Rated power :215kva

Phase: Three phase

Frequency: 50/60hz

Voltage ratio: 11/0.4kV

Vector group :Dyn11

Standard :IEC/EN/IS

MTR-3F-215 transformer is a device that uses the principle of electromagnetic induction to change the AC voltage, the main components include primary coil, secondary coil and iron core (magnetic core). The main functions of the transformer include voltage conversion, current conversion, impedance conversion, isolation, voltage regulation (magnetic saturation transformer) and so on.

MTR-3F-215  Transformers can be divided into distribution transformer, power transformer, fully sealed transformer, combined transformer, dry transformer, oil-immersed transformer, single-phase transformer, furnace transformer, rectifier transformer, reactor, anti-interference transformer, lightning protection transformer, box type transformer test transformer, Angle transformer, high current transformer, excitation transformer, etc. Transformer is the basic equipment of transmission and distribution, widely used in industry, agriculture, transportation, urban communities and other fields.

The advantages of MTR-3F-215 transformer include:

Safe and reliable: the voltage conversion ratio is accurate, the residual consumption is particularly low, good stability, the current influence is small, the interference to the grid is low, and the reliability is high.

Strong applicability: It has multi-function, high reliability, and can run uninterrupted for a long time under various harsh conditions.

Small size: compared with the traditional transformer is too small, compact structure, easy to transport, handling and installation.

Low loss and high benefit: Because the amount of copper wire and silicon steel sheet is reduced, at the same current density and magnetic flux density, the copper loss and iron loss of the transformer are reduced than that of the double-winding transformer, so the benefit is higher.

Increase the limit manufacturing capacity: the limit manufacturing capacity of the transformer is generally limited by the transportation conditions, and under the same transportation conditions, the transformer capacity is larger than that of the double-winding transformer.

However, transformers also have some disadvantages:

High price: Due to its special function, complex structure, and high external protection requirements, the price is higher.

Not long life: Due to its complex structure, complex functional realization technology and assembly process, its service life is relatively short.

Operation noise: some gears in the transformer operation noise is larger, will affect the power equipment operating environment.

In summary, MTR-3F-215 transformer has the advantages of safety and reliability, strong applicability, small size, low loss and high efficiency, and improving the limit manufacturing capacity, but at the same time, it has the disadvantages of high price, short life, and large operating noise.