接口(DRI)模块 LNL-1320 六个输出继电器支持故障安全

概述

LenelS2TM为访问控制解决方案提供双读取器接口(DRI)模块。支持使用标准WiegandData1/Data0或时钟/数据通信的大多数访问控制卡读卡器，键盘或带有键盘的读卡器，以及支持双向RS-485开放监督设备协议(OSDP“”)的读卡器。连接到DRI的所有读取器都支持Lock、unlock和facilitycode离线访问模式。每个DRl支持多达16种不同的卡格式，以及磁卡和wiegand卡格式的问题代码。

LNL-1320 SERIES  DRl提供了智能系统控制器(IsC)和附加到接口上的读卡器之间的重要链接。多达32个DRl模块可以使用RS-485 2线通信，每个端口距离lSC高达4,000英尺。每个DRl模块都单独寻址，以增加OnGuard访问控制软件应用程序的报告功能。DRl包括8个支持常开、常闭、监督和非监督电路的输入。此外，六个输出继电器支持故障安全或故障安全操作。

LENEL接口模块LNL-1320 SERIES 3产品介绍

LenelS2TM为访问控制解决方案提供双读卡器接口（DRI)）模块。 支持大多数使用标准Wiegand Data1/Data0或时钟数据通信的门禁读卡器、键盘或带键盘的读卡器，以及支持双向RS-485开放式监督设备协议(OSDPM)的读卡器。 连接到DRI的所有读卡器都支持锁定、解锁和设施代码离线访问模式。 每个DRI支持多达16种不同的卡格式以及磁卡和韦根卡格式的发行代码。

LNL-1320 SERIES  DRI在智能系统控制器(ISC）和连接到接口的读卡器之间提供了重要的连接。 多达32个DRI模块可以使用RS4852线或4线通信进行多点传输，每个端口距离ISC最多4.000英尺。 每个DRI模块都单独编址，以提高OnGuard9访问控制软件应用程序的报告能力。 DRI包括八个输入，支持常开、常闭、监控和非监控电路。 此外，六个输出继电器支持故障安全或故障安全操作。

接口(DRI)模块 LNL-1320 六个输出继电器支持故障安全

summarize

LenelS2TM provides dual Reader Interface (DRI) modules for access control solutions. Most access control card readers that use standard WiegandData1/Data0 or clock/data communication, keyboards or readers with keyboards, and readers that support the two-way RS-485 Open Supervised Device Protocol (OSDP "") are supported. All readers connected to the DRI support the Lock, unlock, and facilitycode offline access mode. Each DRl supports up to 16 different card formats, as well as issue codes for magnetic and wiegand card formats.

The LNL-1320 SERIES DRl provides an important link between the Intelligent System controller (IsC) and the card reader attached to the interface. Up to 32 DRl modules can communicate using the RS-485 2-wire, with each port up to 4,000 feet from the lSC. Each DRl module is individually addressed to increase the reporting capabilities of OnGuard access control software applications. The DRl includes eight inputs that support normally open, normally closed, supervised, and unsupervised circuits. In addition, six output relays support fail-safe or fail-safe operation.

LENEL interface module LNL-1320 SERIES 3 Product introduction

LenelS2TM provides Dual Reader Interface (DRI) modules for access control solutions. Supports most access control readers, keyboards, or card readers with keyboards that use standard Wiegand Data1/Data0 or clock data communication, as well as readers that support two-way RS-485 Open Supervised Device Protocol (OSDPM). All card readers connected to DRI support lock, unlock, and facility code offline access modes. Each DRI supports up to 16 different card formats and issuance codes for magnetic and Wiegand card formats.

The LL-1320 SERIES DRI provides an important connection between the Intelligent System controller (ISC) and the card reader connected to the interface. Up to 32 DRI modules can use RS4852 wire or 4-wire communication for multipoint transmission, with each port up to 4.000 feet from the ISC. Each DRI module is individually addressed to improve the reporting capabilities of OnGuard9 access control software applications. The DRI includes eight inputs and supports normally open, normally closed, monitored, and unmonitored circuits. In addition, six output relays support fail-safe or fail-safe operation.