LR-W500C  光传感器  可以用于测量距离、位置、速度

LR-W500C是基恩士品牌的产品，是一种激光传感器。

LR-W500C的特性：

检测方式：反射式（单点/多点）。

检测距离：可设定为50mm、100mm、200mm、300mm、500mm。

响应时间：约200μs。

输出：NPN开路集电极、PNP开路集电极。

消耗电流：24VDC时65mA以下（负载除外），12VDC时120mA以下（负载除外）。

环境光照：白炽灯10000lux以下，阳光20000lux以下。

环境温度：-20至+50°C（无冻结）。

相对湿度：35%至85%（无凝结）。

抗震性：可承受2G的冲击。

LR-W500C激光传感器是一种利用激光束进行测量的传感器。它通常包括一个激光发射器和一个激光接收器，可以测量激光束在目标物体上的反射或散射情况，并根据测量结果生成相应的输出信号。

LR-W500C激光传感器可以用于测量距离、位置、速度、角度、形状等参数。它们具有高精度、高速度、非接触式测量等优点，因此被广泛应用于工业控制、自动化生产线、机器人控制、汽车制造、航空航天等领域。

在工业控制中，LR-W500C激光传感器可以用于测量机器的位置、速度和角度等参数，以确保机器的正常运行。在自动化生产线中，激光传感器可以用于检测产品的尺寸、形状和位置等参数，以确保产品的质量和生产效率。在机器人控制中，激光传感器可以用于检测机器人的位置、速度和方向等参数，以确保机器人的精确控制。

总之，LR-W500C激光传感器是一种高精度、高速度、非接触式测量的传感器，它们在工业控制、自动化生产线、机器人控制、汽车制造、航空航天等领域中广泛使用。

LR-W500C  光传感器  可以用于测量距离、位置、速度

The LR-W500C, a product of the Keynes brand, is a laser sensor.

LR-W500C features:

Detection mode: reflex (single point/multi-point).

Detection distance: can be set to 50mm, 100mm, 200mm, 300mm, 500mm.

Response time: about 200μs.

Output: NPN open collector, PNP open collector.

Current consumption: below 65mA at 24VDC (except load), below 120mA at 12VDC (except load).

Ambient light: incandescent lamp below 10000lux, sunlight below 20000lux.

Ambient temperature: -20 to +50°C (without freezing).

Relative humidity: 35% to 85% (no condensation).

Shock resistance: It can withstand the impact of 2G.

The LR-W500C laser sensor is a sensor that uses a laser beam for measurement. It usually includes a laser transmitter and a laser receiver, which can measure the reflection or scattering of the laser beam on the target object, and generate the corresponding output signal based on the measurement results.

The LR-W500C laser sensor can be used to measure distance, position, speed, Angle, shape and other parameters. They have the advantages of high precision, high speed and non-contact measurement, so they are widely used in industrial control, automated production lines, robot control, automobile manufacturing, aerospace and other fields.

In industrial control, the LR-W500C laser sensor can be used to measure parameters such as the position, speed and Angle of the machine to ensure the normal operation of the machine. In automated production lines, laser sensors can be used to detect parameters such as the size, shape and position of products to ensure product quality and production efficiency. In robot control, laser sensors can be used to detect parameters such as the position, speed and direction of the robot to ensure accurate control of the robot.

In short, the LR-W500C laser sensor is a high precision, high speed, non-contact measurement sensor, they are widely used in industrial control, automated production lines, robot control, automotive manufacturing, aerospace and other fields.