0100-20173  步进控制器 VME 模块  可脱离PC独立控制

Applied Materials AMAT 0100-20173 步进控制器 VME 模块

此应用材料公司 AMAT 0100-20173 步进控制器 VME 模块已使用且状况良好。

产品编号： 0100-20173

特点:

杂项VME/VXI卡各种设备

本页列出了所有类别的各种应用材米斗VME /VXI卡。

在自动化设备中，步进驱动器和步进电机运用非常多。是每个技术员或电气工程师必须掌握应用的一类元器件，那么怎么应用步进驱动器和步进电机，让步进电机动起来?通过以下内容来学习。

01首先了解什么是步进驱动器和步进电机?

步进驱动器∶是一种将电脉冲转化为角位移的执行机构。当步进驱动器接收到一个脉冲信号(比如一个按钮闭合导通一次后断开)，它就驱动步进电机按设定的方向转动一个固定的角度(称为“步距角”电机转一圈是360°，假如步进电机每转需要200个脉冲，那么每接收1个脉冲电机轴车专1.8°)，它的旋转是以固定的角度—步—步运行的。

4、半流/全流模式设定:比如说一个电机的额定电流为4A，再有全流和半流设置的驱动器里面，你设为4A实际上只有2-3A，这就是半流，全流的话就是4A，一般情况下我们都用半流，电机会平稳些并且不会发热，如果机械结构特殊。就像垂直运动的机械结构就需要全流来增大电机的力矩，负面影响就是电机可能会很快就发热。

0100-20173步进控制器是一种能够发出均匀脉冲信号的电子产品，它发出的信号进入步进电机驱动器后，会由驱动器转换成步进电机所需要的强电流信号，带动步进电机运转。步进电机控制器能够准确的控制步进电机转过每一个角度。

0100-20173步进电机控制器具有以下特点：

用户编程方便，最多可控制三轴步进电机。

控制步进电机电流0～3A。

显示方式为真彩TFT液晶屏。

按键采用触摸屏。

具有通用2个输入、2个输出点，实现逻辑控制。

存储空间高达1024字节。

支持计算机程序下载。

可脱离PC独立控制。

0100-20173  步进控制器 VME 模块  可脱离PC独立控制

Applied Materials AMAT 0100-20173 Step controller VME module

The VME module of this Applied Materials AMAT 0100-20173 stepper controller is used and in good condition.

Product Number: 0100-20173

Features:

Miscellaneous VME/VXI cards for various devices

This page lists the various required materials for all categories of Meter bucket VME /VXI cards.

In automation equipment, stepper drivers and stepper motors are used very much. Is every technician or electrical engineer must master the application of a class of components, then how to use stepper drivers and stepper motors, concessions to drive up? Learn from the following.

01 First understand what is stepper drive and stepper motor?

Stepper driver: An actuator that converts electrical impulses into angular displacement. When the stepper driver receives a pulse signal (such as a button closed and turned on once), it drives the stepper motor to rotate a fixed Angle in the set direction (called "step Angle" motor rotation is 360°, if the stepper motor needs 200 pulses per revolution, then each receiving 1 pulse motor shaft is 1.8°). It rotates at a fixed Angle, step by step.

4, half current/full current mode setting: for example, the rated current of a motor is 4A, and then full current and half current Settings inside the drive, you set 4A is actually only 2-3A, this is half current, full current is 4A, in general, we use half current, the electric chance is more stable and will not heat, if the mechanical structure is special. Just like the mechanical structure of vertical motion requires full flow to increase the torque of the motor, the negative effect is that the motor may heat up very quickly.

0100-20173 Stepper controller is a kind of electronic product that can send a uniform pulse signal. After the signal sent by it enters the stepper motor driver, it will be converted by the driver into the strong current signal required by the stepper motor to drive the stepper motor to operate. Stepper motor controller can accurately control the stepper motor to turn every Angle.

0100-20173 Stepper motor controller has the following characteristics:

Easy user programming, up to three axis stepper motor can be controlled.

Control stepper motor current 0 ~ 3A.

Display mode is true color TFT LCD screen.

Touch screen is used for buttons.

It has two general input and two output points to achieve logic control.

Up to 1024 bytes of storage.

Support computer program download.

Can be independently controlled from PC.