A06B-6400-H102  FANUC 数控系统放大器 双电源冗余输入

A06B-6400-H102是FANUC数控系统放大器，主要应用于数控机床中。

A06B-6400-H102放大器具有以下特点：

双电源冗余输入。

DC9-36V典型DC24V，功耗小于4W。

具有DC1500V电压隔离以及反接保护功能。

继电器告警输出：光纤链路故障和电源故障告警输出。

外形尺寸：132mm×105mm×52mm。

A06B-6400-H102数控系统放大器是数控机床的重要组成部分，它能够将数控系统发出的指令放大后，控制机床的伺服电机运动，实现机床的自动化加工。数控系统放大器有不同的类型和规格，可以根据数控机床的具体需求进行选择和配置。

A06B-6400-H102数控机床测量反馈装置的作用是检测速度和位移，并把检测结果转化为电信号，反馈给数控装置。

在数控机床中，A06B-6400-H102测量反馈装置是闭环控制、半闭环控制服务系统的重要组成部分。A06B-6400-H102在闭环控制系统中设置检测反馈装置可以提高数控机床的定位精度和重复定位精度回转或直线运动，系统把反馈的信号与输入信号进行比较，其差值经放大后驱动执行部件进行运动加工，其主要作用就是为了检测位移和速度，发出反馈信号，使系统形成闭环控制。

A06B-6400-H102双电源冗余输入是指设备同时接入两路电源，当其中一路电源发生故障时，另一路电源可以自动接替，以确保设备的正常运行。

冗余输入是指设备同时接入两路或更多电源，当其中一路电源发生故障时，其他电源可以自动接替，以确保设备的正常运行。

冗余电源一般以1+1方式、2+1方式、N+1方式为主，当其中一路电源出现故障时，其他电源可以不受其影响，不中断设备的正常运行。

运输详情

1)对于库存商品，我们将在收到付款后3天内发出订单。

2)我们可以通过DHL、UPS、Fedex和EMS运送到世界各地。包装非常坚固。如果您有任何特殊需要，请通知我。

3)您预计会在我们发出后7天左右收到该物品。

A06B-6400-H102  FANUC 数控系统放大器 双电源冗余输入

A06B-6400-H102 is a FANUC CNC system amplifier, mainly used in CNC machine tools.

The A06B-6400-H102 amplifier has the following characteristics:

Dual power supply redundant input.

DC9-36V Typical DC24V, power consumption is less than 4W.

With DC1500V voltage isolation and reverse protection function.

Relay alarm output: Fiber link fault and power supply fault alarm output.

Overall dimensions: 132mm×105mm×52mm.

A06B-6400-H102 numerical control system amplifier is an important part of numerical control machine tool, it can magnify the command issued by the numerical control system, control the servo motor movement of the machine tool, and realize the automatic machining of the machine tool. CNC system amplifiers come in different types and specifications and can be selected and configured according to the specific needs of CNC machine tools.

A06B-6400-H102 CNC machine tool measurement feedback device is used to detect speed and displacement, and the detection results are converted into electrical signals and fed back to the CNC device.

In CNC machine tools, A06B-6400-H102 measurement feedback device is an important part of closed-loop control and semi-closed-loop control service system. A06B-6400-H102 Setting a detection feedback device in the closed-loop control system can improve the positioning accuracy and repeated positioning accuracy of CNC machine tool rotation or linear motion, the system compares the feedback signal with the input signal, and the difference is amplified to drive the actuator for motion processing, its main function is to detect the displacement and speed, and send out feedback signals. Make the system form a closed-loop control.

A06B-6400-H102 Dual power supply redundancy means that the device is connected to two power supplies at the same time. When one power supply fails, the other power supply automatically takes over to ensure the normal running of the device.

Redundant input means that a device is connected to two or more power supplies at the same time. When one power supply fails, the other power supplies automatically take over to ensure the normal running of the device.

Redundant power supplies are mainly used in 1+1, 2+1, or N+1 mode. If one power supply is faulty, other power supplies are not affected and the normal running of the device is not interrupted.

Shipping details

1) For items in stock, we will place an order within 3 days of receipt of payment.

2) We can ship all over the world via DHL, UPS, Fedex and EMS. The packing is very strong. If you have any special needs, please let me know.

3) You can expect to receive the item approximately 7 days after we send it.