CAMERON AAP3798102-00130 操作面板 具有I/O加载功能

CAMERON AAP3798102-00130是卡麦隆品牌下的一款操作面板，具有I/O加载功能，可以为用户和开发人员提供任何应用的灵活部署。

CAMERON AAP3798102-00130的操作温度为-20~70°C，储存温度为-40~85°C，相对湿度为85%，重量为1.5kg，

CAMERON AAP3798102-001 30通用显示压缩机控制模块便用通用接线板或接线板将接线板安装在控制外壳内，并将屏蔽电缆从接线板连接到模块接线板端子上的每个输入电路。Y将每根电缆的屏蔽连接到接线板旁边的金面板。不要在模块端连接屏蔽(在电缆模块端切断屏蔽

并用热缩管绝缘)。Y用屏蔽电缆将现场设备连接到端子板，仅在设备端接地屏蔽(在电缆的端子板端切断屏蔽并用热缩管绝缘)。此外,应

尽可能缩短端子板和设备端的外露(屏蔽外部)引线的长度。直接方法Y将屏蔽电缆从现场设备(传感器、电位计等)直接连接到模块。Y将导

体连接到模块端子板上的适用螺钉上。将现场设备端的屏蔽接地，使最小数量的导体暴露在噪声环境中。不要在模块端连接屏蔽(切断电缆模

块端的屏蔽并用热缩管绝缘)。CAMERON AAP3798102-001 30TBQC不推荐用于模拟模块由于电缆屏蔽要求，端子板快速连接(TBQC)

组件不建议用于模拟模块。

CAMERON AAP3798102-00130的优点有：

具有I/O加载功能，可以为用户和开发人员提供任何应用的灵活部署。

具有HDMI输入功能，可以将人工智能支持的视觉分析添加到各种应用中。

具有两个PoE PSE端口(802.3af)，可提供高达60W的总功率，用于连接PoE摄像机甚至PoE PD设备等设备并为其供电。

由NVIDIA Jetson Xavier NX SoC提供支持，采用六核64位ARM处理器，拥有384个CUDA内核、48个张量内核和两个NVDIA引擎，能够并行运行多个神经网络，提供高达21 TOPS的加速计算性能。

具有8GB板载LPDDR4内存和16GM板载eMMC存储，还提供灵活的存储扩展，具有microSD插槽、mSATA卡插槽和2.5英寸SATA III (6.0 Gbps)托架，易于设置。

CAMERON AAP3798102-00130的缺点有：

价格较高。

不支持蓝牙连接。

CAMERON AAP3798102-00130 操作面板 具有I/O加载功能

CAMERON AAP37998102-00130 is an operating panel under the Cameron brand with I/O loading capabilities that provide users and developers with flexible deployment of any application.

The operating temperature of CAMERON AAP3798102-00130 is -20~70°C, the storage temperature is -40~85°C, the relative humidity is 85%, the weight is 1.5kg, and the storage temperature is -40~85°C.

CAMERON AAP37998102-001 30 The Universal Display compressor control module then mounts the patch board inside the control housing with a common patch board or patch board and connects the shielded cable from the patch board to each input circuit on the module's patch board terminals. Y Connect the shield of each cable to the gold panel next to the patch panel. Do not connect shielding at the module end (Cut shielding at the cable module end)

Insulated with heat shrink tubes). Y Connect the field device to the terminal board with a shielded cable, grounding the shield only at the device end (cut off the shield at the terminal board end of the cable and insulate it with a heat shrink tube). In addition, should

Shorten the length of exposed (shielded external) leads at the terminal board and device end as much as possible. Direct Method Y Connects the shielded cable directly from the field device (sensor, potentiometer, etc.) to the module. Y will guide

The body is connected to the applicable screws on the module terminal board. Ground the shielding at the end of the field device so that a minimum number of conductors are exposed to noise. Do not connect the shield at the end of the module (cut the cable die

Block end shielded and insulated with heat shrink tube). CAMERON AAP3798102-001 30TBQC Not recommended for analog modules Due to cable shielding requirements, terminal board Quick Connection (TBQC)

Components are not recommended for emulation modules.

The advantages of CAMERON AAP3798102-00130 are:

With I/O loading capability, it can provide users and developers with flexible deployment of any application.

With HDMI input capabilities, you can add AI-powered visual analytics to a variety of applications.

With two PoE PSE ports (802.3af), it provides up to 60W of total power for connecting and powering devices such as PoE cameras and even PoE PD devices.

Powered by the NVIDIA Jetson Xavier NX SoC, it features a six-core 64-bit ARM processor with 384 CUDA cores, 48 tensor cores, and two NVDIA engines, capable of running multiple neural networks in parallel, delivering accelerated computing performance of up to 21 TOPS.

Featuring 8GB of on-board LPDDR4 memory and 16GM on-board eMMC storage, it also offers flexible storage expansion with a microSD slot, mSATA card slot, and 2.5-inch SATA III (6.0 Gbps) bays for easy setup.

The disadvantages of CAMERON AAP3798102-00130 are:

The price is higher.

Bluetooth connection is not supported.