NFT-801RM3-S  Seiko 拧紧机设备 伺服驱动器

DDK NFT-801RM3-S拧紧机设备

NFT-801RM3-S先进的运动控制已经发布了7个新的微型FlexPro伺服驱动器额定为60连续输出。60-A的持续电流额定值比相同尺寸的先前型号高33%,使这些成为该公司迄今为止功率密度最高的伺服驱动器。该产品包括PCB安装、机器嵌入式和开发板外形。

PCB安装尺寸

凭借38.1x 25.4毫米的尺寸，一张标准名片可容纳多达4个FlexPro伺服驱动器。PCB安装外形是最紧凑的配置，没有连接器或外壳。它们旨在直接焊接到PCB上，以帮助实现最高的集成度。

NFT-801RM3-S机器嵌入式外形

这些型号在PCB安装版本上增加了一个紧凑的接口卡，允许与电源线和信号线直接连接。这种外形使得在机器的任何地方安装伺服驱动器都很容易。

开发板外形

与本次产品发布中的其他型号基本相同，但安装在一个更大的板上，板上安装了全尺寸连接器，连接器之间的间距更大。开发板非常适合用于概念验证设计和在台式电脑上设置实验。

这些型号在PCB安装版本上增加了一个紧凑的接口卡，允许与电源线和信号线直接连接。这种外形使得在机器的任何地方安装伺服驱动器都很容易。

开发板外形

与本次产品发布中的其他型号基本相同，但安装在一个更大的板上，板上安装了全尺寸连接器，连接器之间的间距更大。开发板非常适合用于概念验证设计和在台式电脑上设置实验。

交换容量:20Gbps转发速率:14.88Mpps MAC地址表大小:8K缓存:1.5MB

工作温度:0℃~40℃

工作湿度:10%~90%RH(非凝结状态)·电源:AC 100~240V 50/60Hz

产品规格

外形尺寸:279mm x 170mm x 44mm重量:1.5kg

机箱材质:金属

安装方式:19寸机架式·电源:内置式

NFT-801RM3-S功能包括:

提供EtherCAT、CANopen、RS485/RS232通信

10至55 Vdc输入电压

额定持续电流为60安

增量编码器、EnDat 2.2和BISS C模式反馈

扭矩、速度和位置操作模式

配置和全环路调谐

STO(安全扭矩关闭)

NFT-801RM3-S  Seiko 拧紧机设备 伺服驱动器

DDK NFT-801RM3-S tightening machine equipment

The NFT-801RM3-S advanced motion control has been released with seven new mini FlexPro servo drivers rated for 60 continuous outputs. The 60-A's sustained current rating is 33 percent higher than previous models of the same size, making these the company's most power-dense servo drives to date. The product includes PCB mounting, machine embeddings and development board shapes.

PCB mounting size

With a size of 38.1x 25.4 mm, a standard business card can accommodate up to 4 FlexPro servo drives. The PCB mounting form factor is the most compact configuration with no connectors or housing. They are designed to be soldered directly to the PCB to help achieve the highest level of integration.

NFT-801RM3-S machine embedded form factor

These models add a compact interface card to the PCB-mounted version, allowing direct connection to power and signal lines. This form factor makes it easy to install servo drives anywhere in the machine.

Development board profile

Basically the same as the other models in this product release, but mounted on a larger board with full-size connectors and more spacing between the connectors. Development boards are ideal for proof-of-concept designs and for setting up experiments on a desktop computer.

These models add a compact interface card to the PCB-mounted version, allowing direct connection to power and signal lines. This form factor makes it easy to install servo drives anywhere in the machine.

Development board profile

Basically the same as the other models in this product release, but mounted on a larger board with full-size connectors and more spacing between the connectors. Development boards are ideal for proof-of-concept designs and for setting up experiments on a desktop computer.

Switching capacity :20Gbps Forwarding rate :14.88Mpps MAC address table Size :8K Cache :1.5MB

Operating temperature :0℃~40℃

Working humidity :10%~90%RH(non-condensing state)· Power supply :AC 100~240V 50/60Hz

Product specification

Dimensions :279mm x 170mm x 44mm Weight :1.5kg

Chassis material: Metal

Installation :19 inch rack · Power supply: built-in

The NFT-801RM3-S features include:

Provides EtherCAT, CANopen, RS485/RS232 communication

10 to 55 Vdc input voltage

The rated continuous current is 60 A

Incremental encoder, EnDat 2.2 and BISS C mode feedback

Torque, speed and position operating modes

Configuration and full loop tuning

STO(Safe torque Off)