ILB-BT-ADIO-221616 Phoenix 光纤端口

ILB-BT-ADIO-221616无线模块原装无线IO模块,16路数字输入，16路数字输出,2路模拟输入,2路模拟输出,蓝牙V1.22.4 GHz频段;1个无线接口;WL AN-blackchannelist

编程模块和传动之间的通讯通过一个传动参数激活，(确保传动参数设置和模块的模式设置相—致)通讯被激活后，NAIO上的I/O信号取代了部分标准l/0信号。

交换机（switch）是一种基于MAC（网卡的硬件地址）识别，能完成封装转发数据包功能的网络设备。

它是连接多台电脑用于集线通信的连接设备。先从物理层开始分析交换机的几类端口，以及他们的特点：

光纤口。提供光纤端口，能直接和光纤调制解调器连接。

带有10/100M自适应以太网口。普通计算机之间的连接，网络智能管理。可自动识别各种网络的设置，自动配置好状态。

带有USB口。可用于宽带卫士360、宽带路由器、带路由功能的ADSL Modem、多WAN口路由器的WAN口连接等。

交换机（switch）是一种基于MAC（网卡的硬件地址）识别，能完成封装转发数据包功能的网络设备。

它是连接多台电脑用于集线通信的连接设备。先从物理层开始分析交换机的几类端口，以及他们的特点：

ILB-BT-ADIO-221616光纤口。提供光纤端口，能直接和光纤调制解调器连接。

带有10/100M自适应以太网口。普通计算机之间的连接，网络智能管理。可自动识别各种网络的设置，自动配置好状态。

带有USB口。可用于宽带卫士360、宽带路由器、带路由功能的ADSL Modem、多WAN口路由器的WAN口连接等。

控制器电源模块是控制器电路中重要的组成部分，它为整个控制器提供稳定的直流电源，保证控制器的正常工作。

ILB-BT-ADIO-221616控制器电源模块根据需要会采用不同的电路设计，如三相输入电源模块(DC24V/50Hz)与输入直流电源模块(DC300/50 Hz)，并根据需要有相应电抗器，以保证电网的正常运行。

ILB-BT-ADIO-221616 Phoenix 光纤端口

ILB-BT-ADIO-221616 Wireless module Original wireless IO module,16 digital input,16 digital output,2 analog input,2 analog output, Bluetooth V1.22.4GHz band; 1 wireless interface; WL AN-blackchannelist

The communication between the programming module and the transmission is activated by a transmission parameter (ensuring that the transmission parameter Settings are consistent with the mode Settings of the module). When the communication is activated, the I/O signal on the NAIO replaces some of the standard l/0 signals.

switch (switch) is a network device based on MAC (network card hardware address) identification, which can complete the function of packaging and forwarding packets.

It is a connection device that connects multiple computers for concentrator communication. Start from the physical layer to analyze several types of switch ports and their characteristics:

Optical fiber port. Provides fiber optic port for direct connection to fiber optic modem.

With 10/100M adaptive Ethernet port. Connection between ordinary computers, network intelligent management. It can automatically identify various network Settings and automatically configure the state.

With USB port. It can be used for broadband Guardian 360, broadband router, ADSL Modem with routing function, WAN port connection of multi-WAN router, etc.

switch (switch) is a network device based on MAC (network card hardware address) identification, which can complete the function of packaging and forwarding packets.

It is a connection device that connects multiple computers for concentrator communication. Start from the physical layer to analyze several types of switch ports and their characteristics:

ILB-BT-ADIO-221616 Optical fiber port. Provides fiber optic port for direct connection to fiber optic modem.

With 10/100M adaptive Ethernet port. Connection between ordinary computers, network intelligent management. It can automatically identify various network Settings and automatically configure the state.

With USB port. It can be used for broadband Guardian 360, broadband router, ADSL Modem with routing function, WAN port connection of multi-WAN router, etc.

The controller power module is an important part of the controller circuit, which provides a stable DC power supply for the whole controller to ensure the normal operation of the controller.

ILB-BT-ADIO-221616 controller power module adopts different circuit design according to needs, such as three-phase input power module (DC24V/50Hz) and input DC power module (DC300/50 Hz), and has corresponding reactors according to needs to ensure the normal operation of the power grid.