CE687-1 MEGGITT 压电式加速度传感器

产品名称:美捷特测振仪CE687压电加速度计

品牌:美捷特

产品编号: Vibro-Meter CE687

标签:美捷特美捷特CE687压电测振仪压电式CE687压电式加速度计测振仪测振仪CE687美捷特压电式加速度计美捷特振动计压电式美捷特振动计压电式加速度计美捷特压电式加速度计美捷特振动计压电式加速度计CE687加速度计振动计振动计压电式加速度计美捷特振动计加速度计美捷特CE687压电式加速度计美捷特CE687加速度计美捷特CE67加速度计美捷特CE687美捷特振动计CE<>加速度计压电式加速度计

CE687压电式加速度传感器是—款通用的行业标准4至20 mA环路供电振动传感器(振动变送器)，具有压电传感元件、集成电子元件和电流输出。其灵敏度为4至20 mA，与0至10或0至20 g成正比。

CE687可以仅用作传感器，也可以配备由不锈钢编织层保护的一体式电缆。仅传感器版本允许使用一系列不同的电缆组件之—将传感器连接到监控系统，具体取决于应用和环境。

CE687专为恶劣的工业环境而设计和制造。

CE687压电式加速度传感器是一种常见的加速度传感器类型，它利用压电效应来测量加速度。压电式加速度传感器通常由一个质量块和压电元件组成，当质量块受到加速度作用时，会根据加速度的方向和大小产生相应的应力，压电元件则将这种应力转化为电信号输出。

CE687压电式加速度传感器具有以下特点：

高灵敏度：由于压电元件具有较高的灵敏度，因此CE687加速度传感器能够感知微小的加速度变化。

宽频带：CE687加速度传感器具有较宽的频带范围，可以测量频率范围较广的加速度信号。

抗干扰能力强：由于CE687加速度传感器采用数字信号输出，因此具有较强的抗干扰能力，能够适应复杂的工业环境。

使用寿命长：由于CE687加速度传感器采用金属外壳，具有较高的防护等级和稳定性，因此其使用寿命较长。

总之，CE687压电式加速度传感器是一种可靠、灵敏、抗干扰能力强的加速度测量设备，广泛应用于振动测量、机械故障诊断、结构健康监测等领域。

CE687-1 MEGGITT 压电式加速度传感器

Product name: Megett vibrometer CE687 piezoelectric accelerometer

Brand: Metjet

Product number: Vibro-Meter CE687

Tags: Megett Megett CE687 Piezoelectric vibrometer Piezoelectric accelerometer Piezoelectric accelerometer CE687 piezoelectric accelerometer Piezoelectric accelerometer Piezoelectric accelerometer Megert vibration accelerometer Megert CE687 Piezoelectric accelerometer Megert CE687 accelerometer Megert CE67 accelerometer Megert CE687 Vibration accelerometer CE<> Accelerometer Piezoelectric accelerometer

The CE687 piezoelectric acceleration sensor is a general-purpose, industry-standard 4 to 20 mA loop-powered vibration sensor (vibration transmitter) with a piezoelectric sensing element, integrated electronics, and current output. Its sensitivity is 4 to 20 mA, proportional to 0 to 10 or 0 to 20 g.

The CE687 can be used as a sensor alone, or it can be equipped with a one-piece cable protected by a stainless steel braided layer. The sensor-only version allows the use of a range of different cable assemblies - to connect the sensor to the monitoring system, depending on the application and environment.

CE687 is designed and manufactured for harsh industrial environments.

CE687 piezoelectric acceleration sensor is a common type of acceleration sensor, which uses the piezoelectric effect to measure acceleration. The piezoelectric acceleration sensor is usually composed of a mass block and a piezoelectric element. When the mass block is subjected to acceleration, the corresponding stress is generated according to the direction and size of the acceleration, and the piezoelectric element converts this stress into an electrical signal output.

CE687 piezoelectric acceleration sensor has the following characteristics:

High sensitivity: Due to the high sensitivity of the piezoelectric element, the CE687 acceleration sensor is capable of sensing small changes in acceleration.

Wide band: The CE687 acceleration sensor has a wide band range and can measure acceleration signals with a wide frequency range.

Strong anti-interference ability: Because the CE687 acceleration sensor uses digital signal output, it has strong anti-interference ability and can adapt to complex industrial environments.

Long service life: Due to the metal housing of the CE687 acceleration sensor, it has a high level of protection and stability, so its service life is long.

In short, CE687 piezoelectric acceleration sensor is a reliable, sensitive, strong anti-interference ability of acceleration measurement equipment, widely used in vibration measurement, mechanical fault diagnosis, structural health monitoring and other fields.