AEM402 LYNGSO 交流伺服电机 单相异步电动机

品牌:LYNGSO

型号:MARINE AEM402

产地:USA

质保:一年

交流伺服电机通常都是单相异步电动机，有鼠笼形转子和杯形转子两种结构形式。与普通电机一样，交流伺服电机也由定子和转子构成。定子上有两个绕组，即励磁绕组和控制绕组，两个绕组在空间相差90°电角度。固定和保护定子的机座一般用硬铝或不锈钢制成。笼型转子交流伺服电机的转子和普通三相笼式电机相同。杯形转子交流伺服电机的结构如图3-12由外定子4，杯形转子3和内定子5三部分组成。

MARINE AEM402伺服电机是指将电能转变为机械能的一种机器，主要由一个用以产生磁场的电磁铁绕组或分布的定子绕组和一个旋转电枢或转子组成。

AEM402交流伺服电机有三种控制方式：幅值控制、相位控制和幅值相位控制。

MARINE AEM402伺服电机三种控制方式和控制原理如下：

转矩控制：通过外部模拟量的输入或直接的地址的赋值来设定电机轴对外的输出转矩的大小。

速度控制：通过模拟量的输入或脉冲的频率都可以进行转动速度的控制。

位置控制：伺服中最常用的控制，一般通过外部输入的脉冲的频率来确定转动速度的大小，通过脉冲的个数来确定转动的角度。

如果您有任何疑问或需要任何帮助，请直接与我联系。我会尽我所能帮助你。

我们相信我们的产品是优秀的。我们相信您会对您的购买感到满意。

当您对手我们的产品和服务感到满意时，请给予我们积极的反馈。

如果有i问题，请立即通过电子邮件与我们联系。

AEM402 LYNGSO 交流伺服电机 单相异步电动机

Brand :LYNGSO

Model :MARINE AEM402

Origin :USA

Warranty: One year

Ac servo motors are usually single-phase asynchronous motors, with squirrel-cage rotor and cup rotor two structural forms. Like ordinary motors, AC servo motors are also composed of a stator and a rotor. There are two windings on the stator, namely the excitation winding and the control winding, and the two windings are different in space by 90° electrical Angle. The frame that holds and protects the stator is generally made of duralumin or stainless steel. The rotor of the cage-rotor AC servo motor is the same as that of the ordinary three-phase cage motor. The structure of the cup-rotor AC servo motor is shown in Figure 3-12. It consists of three parts: outer stator 4, cup rotor 3 and inner stator 5.

MARINE AEM402 servo motor refers to a machine that converts electrical energy into mechanical energy, which is mainly composed of an electromagnet winding or distributed stator winding used to generate a magnetic field and a rotating armature or rotor.

AEM402 AC servo motor has three control modes: amplitude control, phase control and amplitude phase control.

MARINE AEM402 servo motor three control methods and control principles are as follows:

Torque control: Through the input of an external analog or direct address assignment to set the output torque of the motor shaft.

Speed control: Rotation speed can be controlled by analog input or pulse frequency.

Position control: The most commonly used control in servo, generally through the frequency of external input pulses to determine the size of the rotation speed, through the number of pulses to determine the rotation Angle.

If you have any questions or need any help, please contact me directly. I'll do whatever I can to help you.

We believe our products are excellent. We are confident that you will be satisfied with your purchase.

When you are satisfied with our products and services, please give us positive feedback.

If you have any questions, please contact us immediately via email.