Delta Tau 603670-109 PMAC 2 PC/104 CPU 主板 提供扩展的系统用途

Delta Tau 603670-109 PMAC 2 PC/104 CPU 主板  提供扩展的系统用途

603670-109参数：

产品描述

603670-109是由Delta Tau制造的中央处理器（CPU）板。 该板旨在与 PMAC 2 运动控制系统的成员连接。PMAC 2 - PC/104 CPU 板，提供大容量轴控制。集成数字信号处理器 （DSP） 提供扩展的系统用途。此 CPU 也可以独立操作，因为它包括以太网、USB 和 RS232 端口。

遵循所有提供的安装和存储参数将保护设备免受可避免的损坏。 在 603670-109 上发现的组件很敏感，应小心处理。只有合格的人员才能将电路板安装到 PMAC 控制器中。在处理电路板之前，请释放手上的所有静电。静态能量会传递到电路板上，破坏和腐蚀电路，破坏正常的603670-109电路板活动。

安装603670-109时，请将其安装在适当的外壳中。PMAC 系统及其电路板应安装在电气柜或计算机等外壳中。这些空间将保护整个PMAC系统免受环境风险的影响，例如极端温度，高湿度或空气中的碎片。操作设施中的条件会影响电路板以及PMAC系统产生的输出。在生产线上安装和运行时，设施的环境温度应保持在 0°C 至 45°C 或 32°F 至 113°F 之间。

603670-109 is a central processing unit (CPU) board manufactured by Delta Tau. This board is designed to connect with members of the PMAC 2 motion control system. PMAC 2- PC/104 CPU board, providing high capacity axis control. The integrated digital signal processor (DSP) provides extended system usage. This CPU can also operate independently as it includes Ethernet, USB, and RS232 ports.

Following all provided installation and storage parameters will protect the equipment from avoidable damage. The components found on 603670-109 are very sensitive and should be handled with care. Only qualified personnel can install the circuit board into the PMAC controller. Before handling the circuit board, please release all static electricity from your hands. Static energy can be transmitted to the circuit board, damaging and corroding the circuit, disrupting normal 603670-109 circuit board activity.

When installing 603670-109, please install it in a suitable housing. The PMAC system and its circuit board should be installed in enclosures such as electrical cabinets or computers. These spaces will protect the entire PMAC system from environmental risks such as extreme temperatures, high humidity, or debris in the air. The conditions in the operating facilities can affect the output generated by the circuit board and PMAC system. During installation and operation on the production line, the ambient temperature of the facility should be maintained between 0 ° C to 45 ° C or 32 ° F to 113 ° F.