G1L012M0 Delta Tau驱动器 PMAC 2 支持步进输出

G1L012M0 Delta Tau驱动器 PMAC 2  支持步进输出

G1L012M0参数：

产品描述

G1L012M0是由Delta Tau开发的Geo Brick Drive。 它是 PMAC 2 系列控制器的成员。该砖式驱动器将PMAC 2运动控制与基于IGBT的技术相结合。内部DSP不输出模拟信号，而是产生高功率数字信号。这些先进的系统连接并运行连接的控制器和驱动器。该系统允许Geo Brick以更高的效率控制交流感应，有刷和无刷电机，并减少等待时间。除了交流和直流驱动器外，该装置还支持步进输出。步进输出为第三方驱动和宏环连接提供接入点。 集成的 32 轴 Turbo PMAC 2 控制器允许该装置针对一系列具有运动控制功能的应用进行编程。

安装 G1L012M0 时，必须遵循所有提供的安装和安全参数。砖具有应小心处理的敏感组件。只允许经过培训的人员安装设备。在连接之前，请释放手上的所有静电。如果电路与电路板接触，可能会腐蚀电路。安装时，本机需要一个封闭的空间。电气柜或计算机等外壳是理想的操作环境。设施的环境温度不应低于 0°C 或 32°F，也不高于 45°C 或 113°F。 

G1L012M0 is a Geo Brick Drive developed by Delta Tau. It is a member of the PMAC 2 series controller. This brick drive combines PMAC 2 motion control with IGBT based technology. The internal DSP does not output analog signals, but generates high-power digital signals. These advanced systems connect and operate connected controllers and drivers. This system allows Geo Brick to control AC induction, brush and brushless motors with higher efficiency and reduce waiting time. In addition to AC and DC drives, the device also supports stepper output. Step output provides access points for third-party drivers and macro ring connections. The integrated 32 axis Turbo PMAC 2 controller allows the device to be programmed for a range of applications with motion control functions.

When installing G1L012M0, all provided installation and safety parameters must be followed. Bricks have sensitive components that should be handled with care. Only trained personnel are allowed to install equipment. Before connecting, please release all static electricity from your hands. If the circuit comes into contact with the circuit board, it may corrode the circuit. When installing, this machine requires an enclosed space. Electrical cabinets or computer enclosures are ideal operating environments. The ambient temperature of the facility should not be lower than 0 ° C or 32 ° F, nor higher than 45 ° C or 113 ° F.