1336-BDB Rockwell 变频驱动器

品牌：Rockwell

型号：1336-BDB

描述:1336-BDB-SP3C PCB是艾伦-布拉德利制造的栅极驱动PCB，额定电压为460伏交流电压。工作温度应在О到50摄氏度的范围内。

1336-8DB-SP3C栅极驱动PCB(印刷电路板)是Allen-Bradey 13356变频驱动器的备件模块。PCB也由Allen-Bradley设计和制造。它与1336 Plus、力、冲击和其他驱动器系列完全兼容。PCB易于安装，尺寸紧凑.PCB的额定电压为450伏交流电，额定功率为15马力此栅极驱动PCB放置在主机1336驱动器的主控制板附近。1336变频器提供扭矩和速度调节功能。该驱动器具有电机控制算法，可在低速时提供出色的扭矩调节。该驱动器配备了使用再生能量的IGBT制动系统，无需昂贵的斩波器电路即可运行。1336-BDB-SP3C PCB可用作主机驱动器的功率放大单元。它将低功率输入转换为高功率输入，可以传输到驱动器的不同组件。

1335-D8-SP3C PCB符合满足EMC标准所需的所有规格。该PCE的最低和最高工作温度分别为0和50摄氏度.这种高性能电源模块可以使用跳线连接器进行连接。PCB具有连接到SCR栅极的不同逻辑电平。133-8DB-SPSC PCB用作功率放大器单元。在更换PCB的过程中，操作员必须使用接地腕带。应避免静电放电，以保护栅极驱动PCB的敏感部分.

集成接线，减少占用面积

双列接线端子，易于安装和维护

可选冗余,最人增加系统的可用性

独特的散热管理，塔加产品的寿命

1336-BDB c300控制器水平与垂直安装比较:最容易维护

双端子I/O接线，实现接线密度与易于安装的平衡

可插发的端子，和双端子接线易于接线与维护

四端子阶段对于底端的接线造成困难

并列紧挨的模块容易造成接发混淆

1336-BDB C300有几部分组成控制器硬件

控制软件CEE(Control Execution Environmenty相应机电部份

柜内电源

控制网络接口-Fault Tolerant Ethernet(FTE)

2本地IO Link接口

C300控制器模块

运行CEE(控制操作系统)支持PMIO

-C系列1/O

-A系列卡件式1/o

1336-BDB Rockwell 变频驱动器

Brand: Rockwell

Model: 1336-BDB

Description: The 1336-BDB-SP3C PCB is a grid-driven PCB manufactured by Allen Bradley and rated at 460 volts AC. The operating temperature should be in the range of 60 to 50 degrees Celsius.

The 1336-8DB-SP3C gate Drive PCB(printed circuit board) is a spare part module for Allen-Bradey 13356 variable frequency drivers. PCBS are also designed and manufactured by Allen-Bradley. It is fully compatible with the 1336 Plus, Force, impact and other drive families. PCB is easy to install and compact in size. The PCB is rated at 450 volts AC and 15 HP. This gate drive PCB is placed near the main control board of the host 1336 driver. The 1336 inverter provides torque and speed regulation. The drive has a motor control algorithm that provides excellent torque regulation at low speeds. The driver is equipped with an IGBT braking system that uses regenerative energy and can operate without expensive chopper circuitry. The 1336-BDB-SP3C PCB can be used as a power amplification unit for host drivers. It converts low power inputs into high power inputs that can be transmitted to different components of the drive.

The 1335-D8-SP3C PCB meets all specifications required to meet EMC standards. The minimum and maximum operating temperatures of the PCE are 0 and 50 degrees Celsius, respectively. This high-performance power module can be connected using a jumper connector. The PCB has different logic levels connected to the SCR gate. 133-8DB-SPSC PCB is used as a power amplifier unit. During the PCB replacement process, the operator must use a grounding wrist strap. Electrostatic discharge should be avoided to protect sensitive parts of the gate drive PCB.

Integrated wiring to reduce the occupied area

Double row terminals for easy installation and maintenance

Optional redundancy, most people increase the availability of the system

Unique thermal management, Taga product life

1336-BDB c300 controller horizontal vs. vertical installation: easiest to maintain

Dual terminal I/O connections balance connection density with ease of installation

Pluggable terminals and double terminal connections are easy to connect and maintain

The four-terminal stage makes it difficult to connect the bottom end

Close together modules can easily cause confusion in hair extensions

1336-BDB The C300 has several parts that make up the controller hardware

Control software CEE(Control Execution Environmenty) corresponding electromechanical parts

Cabinet power supply

Control Network Interface -Fault Tolerant Ethernet(FTE)

2 Local I/O Link interface

C300 controller module

Running CEE(Control Operating System) supports PMIO

-C Series 1/O

-A series card type 1/o