0100-00003 AMAT 步进驱动器VME模块

品牌：AMAT

型号：0100-00003

特点:

b型VME模块状态指示灯集成电路设计

拉迪西斯/AMAT 0100-00003是—个紧凑的，B型VME步进驱动器VME模块。

0100-00003 步进驱动器是一种将电脉冲转化为角位移的执行机构。步进电机和步进驱动器构成步进电机驱动系统。步进电机驱动系统的性能，不但取决于步进电机自身的性能，也取决于步进电机驱动器的优劣。

步进电机不能直接接到直流或交流电上工作，必须使用专门的驱动器。步进驱动器的原理是采用单极性直流电源供电，只要对步进电机的各相绕组按合适的时序通电，就能使步进电机步进转动。步进驱动器一般需要接脉冲信号，方向信号，使能信号一般不接，输出接电机A组，电机B组，调换任意A+和A-或者B+和B-可以调换电机方向，当然从程序内部也可以修改。

0100-00003 步进电机驱动电压不足会影响以下方面：

电机不转或者转速缓慢 。当步进驱动器电压不足时，会导致电机不转或者转动速度非常缓慢，无法满足正常的运行要求。

纹波现象 。电压不足会导致步进电机运转时出现“纹波”现象，表现为不平稳的旋转和震动。

丢步现象 。在步进电机正常运转时，如果出现电压不足的情况，会出现所谓的“丢步”现象，即指电机在接收到某些脉冲时无法正确转动对应的角度。

0100-00003 解决步进电机"丢步"现象的方法有：

调整电机的接线来改变方向。

改变输入信号频率CP来避开振荡区。

采用细分驱动器，使步距角减少，运行平滑些。

负载的转动惯量不要大于步进电机转动惯量的10倍。

电源功率要大于步进电机额定电流的1.6倍。

常问问题

1.保修怎么样?

所有产品均享有1年保修。2.什么是交货时间?

通常1-3个工作日

3.其他供应商的价格比您好吗?

“为客户创造利益是我们的信念。如果您有更好的价格，请告诉我们。我们会尽力满足您的价格并支持您4 .发货怎么样?

我们可以安排发货以具有竞争力的价格，例如顺丰，德邦等

0100-00003 AMAT 步进驱动器VME模块

Brand: AMAT

Model: 0100-00003

Features:

b type VME module status indicator integrated circuit design

The Radis /AMAT 0100-00003 is a compact, Type B VME stepper driver VME module.

The 0100-00003 stepper driver is an actuator that converts electrical impulses into angular displacement. Stepper motor and stepper driver constitute a stepper motor drive system. The performance of the stepper motor drive system depends not only on the performance of the stepper motor itself, but also on the quality of the stepper motor driver.

Stepper motor can not be directly connected to DC or AC power work, must use a special driver. The principle of the stepper driver is to use unipolar DC power supply, as long as the phase winding of the stepper motor is energized according to the appropriate timing, it can make the stepper motor step rotation. The stepper driver generally needs to be connected to the pulse signal, the direction signal, the enable signal is generally not connected, the output is connected to the motor A group, the motor B group, the replacement of any A+ and A- or B+ and B- can be changed the direction of the motor, of course, from the program can also be modified.

0100-00003 Insufficient stepper motor drive voltage will affect the following aspects:

The motor does not rotate or the speed is slow. When the stepper driver voltage is insufficient, it will cause the motor to not rotate or the rotation speed is very slow, which can not meet the normal operation requirements.

Ripple phenomenon. Insufficient voltage will lead to the stepper motor operation "ripple" phenomenon, manifested as uneven rotation and vibration.

Step loss phenomenon. In the normal operation of the stepper motor, if there is insufficient voltage, there will be a so-called "lost step" phenomenon, that is, the motor cannot correctly rotate the corresponding Angle when receiving some pulses.

0100-00003 Methods to solve the stepper motor "lost step" phenomenon are:

Adjust motor wiring to change direction.

Change the input signal frequency CP to avoid the oscillation zone.

The subdivision driver is used to reduce the step Angle and smooth the operation.

The moment of inertia of the load should not be greater than 10 times the moment of inertia of the stepper motor.

The power of the power supply is greater than 1.6 times the rated current of the stepper motor.

Frequently asked question

1. What about the warranty?

All products are guaranteed for 1 year. 2. What is delivery time?

Usually 1-3 working days

3. What are the prices of other suppliers?

"Creating benefits for our customers is our belief. If you have a better price, please let us know. We will try our best to meet your price and support you. 4. How about delivery?

We can arrange shipments at competitive prices, e.g. Sf Express, Deppon, etc