Delta Tau 602404-100 VME 板 用于与 PMAC 2 系列运动控制器连接

Delta Tau 602404-100  VME 板  用于与 PMAC 2 系列运动控制器连接

品牌：Delta Tau

型号：602404-100 

离散 I/O 2 K（任意组合）

电压输入 5 伏直流电

模拟量 I/O 8 K

串行端口 3

布尔执行 每个布尔函数 0.4 微秒

工作温度 0 至 60 摄氏度

内存 512 KB

电流输入 3.1 安培

产品描述

Delta Tau 602404-100 是 VME 板。 该板是一款总线扩展卡，用于与 PMAC 2 系列运动控制器连接。它可以应用于生产线上的多种用途，例如机器人、包装和通用自动化。40 MHz编码器计数率和18位模拟输出使该板能够高效运行。该器件集成了 ±10 V 模拟速度和扭矩命令，从而扩展了系统应用。使用此板时，也可以进行宏环连接。

应遵循制造商提供的存储和安装参数，以防止对设备造成任何损坏。 602404-100 具有敏感组件，在处理或安装电路板时需要小心。合格人员是唯一应负责安装或安装设备的用户。在触摸设备之前，请务必释放手上的所有静电。静电会破坏和腐蚀电路板上的电路，导致单元错误。

Delta Tau 602404-100的安装位置应位于封闭的外壳中。可接受的位置包括电气柜以及个人电脑。这些空间将防止环境污染物（如漂浮物、极端温度和过多的水分）渗透到设备中。操作条件会影响设备，应密切监控。环境温度可以安全地在 0°C 至 45°C 或 32°F 至 113°F 之间。

Delta Tau 602404-100 is a VME board. This board is a bus expansion card, which is used to connect with PMAC 2 series motion controller. It can be applied for various purposes on production lines, such as robotics, packaging, and general automation. The 40 MHz encoder counting rate and 18 bit analog output enable the board to operate efficiently. This device integrates ± 10 V simulated speed and torque commands, thereby expanding system applications. When using this board, macro ring connections can also be made.

The storage and installation parameters provided by the manufacturer should be followed to prevent any damage to the equipment. 602404-100 has sensitive components and requires caution when handling or installing circuit boards. Qualified personnel are the only users responsible for installing or installing equipment. Before touching the device, be sure to release all static electricity from your hands. Static electricity can damage and corrode circuits on circuit boards, leading to unit errors.

The installation position of Delta Tau 602404-100 should be located in a closed enclosure. Acceptable locations include electrical cabinets and personal computers. These spaces will prevent environmental pollutants such as floating debris, extreme temperatures, and excessive moisture from penetrating the equipment. Operating conditions can affect the equipment and should be closely monitored. The ambient temperature can be safely between 0 ° C to 45 ° C or 32 ° F to 113 ° F.