Delta Tau 602469-102 ACC-8E 2 轴数模 （DAC） 分线接线端子板

Delta Tau 602469-102 ACC-8E 2 轴数模 （DAC） 分线接线端子板

产品描述

Delta Tau 602469-102 是一款数模 （DAC） 接线端子板。该板开发用于与 PMAC 2 系统接口。它用于转换与PMAC系统和外部I/O模块之间发送的数字和模拟信号。四个 18 位数模转换器将所有信号转换为 I/O 模块可消化信号。所有模拟输出均可维持 -10 V 至 10 V 的最大输出范围。Delta Tau 602469-102设备上的跳线允许用户在开路、闭合、下沉或源极之间进行选择。电路板随附一根 100 针扁平电缆，用于将其连接到 PMAC 2 系统。其他扁平电缆也可用于使用板载 IDC 接头发送信号。

应遵循适当的安全和安装参数，以保持细木工板的完整性。602469-102 包含需要经过培训的人员处理的敏感电路和组件。如果处理或安装不当，可能会损坏设备。在处理电路板之前，请释放手上的所有静电，因为它会腐蚀电路.该板应安装在受保护的电气柜或个人计算机中。这将防止任何极端温度、湿气或飞溅的碎屑中断设备。系列手册和器件数据表包含安装和操作该板的完整指南。所有PMAC系统的技术支持最初由制造商Delta Tau提供。

Delta Tau 602469-102 is a digital analog (DAC) terminal board. This board is developed for interface with the PMAC 2 system. It is used to convert digital and analog signals sent between the PMAC system and external I/O modules. Four 18 digit analog-to-digital converters convert all signals into I/O module digestible signals. All analog outputs can maintain a maximum output range of -10 V to 10 V. The jumpers on Delta Tau 602469-102 devices allow users to choose between open, closed, sinking, or source. The circuit board comes with a 100 pin flat cable for connecting it to the PMAC 2 system. Other flat cables can also be used to send signals using onboard IDC connectors.

Appropriate safety and installation parameters should be followed to maintain the integrity of the blockboard. 602469-102 contains sensitive circuits and components that require trained personnel to handle. If handled or installed improperly, it may damage the equipment. Before handling the circuit board, please release all static electricity on your hands as it can corrode the circuit. The board should be installed in a protected electrical cabinet or personal computer. This will prevent any extreme temperature, moisture, or splashing debris from interrupting the equipment. The series manual and device data sheet contain complete guidelines for installing and operating the board. The technical support for all PMAC systems was initially provided by manufacturer Delta Tau.