Delta Tau 602705-107 PMAC通用CPU主板 是多轴控制器的主控制器

Delta Tau 602705-107 PMAC通用CPU主板  是多轴控制器的主控制器

技术规格

品牌：Delta Tau

型号：

电压输入范围： -10 至 +10 伏

电流输入范围： 4 至 20 mA

校准： 出厂设置为 10 伏 +/- 2mV

输入数量： 16 个电流输入

模块类型： 模拟量输入扩展器模块

权力： + 5 伏

产品描述

Delta Tau 602705-107 是一款通用中央处理器 （CPU）。 该CPU板专为PMAC 2系列开发，是多轴控制器的主控制器。PMAC 2 系列的所有运动控制功能均由 CPU 模块控制。与Delta Tau开发的其他CPU不同，602705-107是通用型号。 这允许该板与所有类型的PMAC控制器交叉兼容，如VME，Mini，Turbo，Lite和Ultralite。无论控制器如何，安装的CPU都可以同时执行系统内的运动轴。系统集成的数字信号处理器（DSP）处理CPU执行的所有计算，从而提高系统性能。由于该器件具有串行 RS422 连接以及 VME 总线端口，因此可以进行外部 I/O 接口。

应遵循提供的安装和存储参数，以防止任何不必要的设备降级。602705-107 具有复杂的电路，很容易中断或损坏。只有经过安装板和其他电气元件培训的人员才能操作此设备。仔细安装将保护设备免受任何用户损坏。在处理电路板之前，请释放所有静电，因为这会腐蚀电路.安装地点应为受保护的外壳，例如个人计算机或电气柜。将设备安装在这样的空间中将保护系统免受温度、湿气和碎屑的影响。

Delta Tau 602705-107 is a general-purpose central processing unit (CPU). This CPU board is specifically developed for the PMAC 2 series and serves as the main controller for multi axis controllers. All motion control functions of the PMAC 2 series are controlled by the CPU module. Unlike other CPUs developed by Delta Tau, 602705-107 is a universal model. This allows the board to be cross compatible with all types of PMAC controllers, such as VME, Mini, Turbo, Lite, and Ultralite. Regardless of the controller, the installed CPU can simultaneously execute the motion axes within the system. The integrated digital signal processor (DSP) of the system processes all calculations executed by the CPU, thereby improving system performance. Due to its serial RS422 connection and VME bus port, this device can perform external I/O interfaces.

The installation and storage parameters provided should be followed to prevent any unnecessary device degradation. 602705-107 has complex circuits that are easily interrupted or damaged. Only personnel trained on installation boards and other electrical components can operate this equipment. Careful installation will protect the device from any user damage. Before handling the circuit board, please release all static electricity as it can corrode the circuit. The installation location should be in a protected enclosure, such as a personal computer or electrical cabinet. Installing the equipment in such a space will protect the system from the effects of temperature, moisture, and debris.