RAMIX PMC237C-008EMI PLC系统 模块

RAMIX PMC237C-008EMI  PLC系统 模块

RAMIX PMC237C-008EMI  PLC系统 模块

该地址空间定义为支持PCI总线硬件配置（请参阅PCI总线规范以获取有关配置地址空间）。PCI总线目标需要实现基址配置地址空间中的寄存器，用于访问内部寄存器或函数。这个BIOS使用基址寄存器来确定设备需要多少空间然后指定设备将驻留在该空间中的位置。此功能允许PCI设备位于内存或输入/输出地址中空间VMIVME-7698 BIOS根据将IRQx线路映射到适当的设备标准ISA架构。该初始化操作无法更改；但是，自定义应用程序可以重新路由BIOS完成初始配置周期后中断配置。

贡献于节能环保

采用内置低功耗平台的ARM?处理器(600MHz、T.I. Cortex-A8)的SoC 「AM3354」，在确保足够执行能力的同时，实现了低消费电力。

减轻维护保全业务的无风扇设计

废除CPU风扇、存储器采用SD卡、完全无转动机构设计。另外，使用产品附带的防水垫圈、防水螺钉设置时，前端部分防止粉尘或异物侵入，能够满足IP65标准的防水规格。极力减少易老化零部件的使用，大幅度减轻了维护保全业务的负担。

节省空间的设计，贡献于装置的小型化

采用5.7英寸LCD的小型、轻量[大约0.8kg]的触摸屏一体型PC机。贡献于装置的小型化。还可利用VESA规格100×100mm标准的安装结构，安置在LCD支架。

配置USB、LAN等计算机的标准扩展接口

配置了USB×1、100BASE-T×1、RS-232C×1等接口机能。同时附带各个接口的驱动软件。

附带支持系统开发的软件工具“CONTEC Manager”

配置了FTP服务器机能、时间表功能、利用NTP的自动时间调整机能、Auto RUN机能等，有助于构件系统的软件工具“CONTEC Manager”。

RAMIX PMC237C-008EMI  PLC系统 模块

This address space is defined to support PCI bus hardware configuration (please refer to PCI bus specification for the configuration address space). The PCI bus target needs to implement the register in the base address configuration address space for accessing internal registers or functions. This BIOS uses the base address register to determine how much space the device needs and then specifies where the device will reside in that space. This function allows PCI devices to be located in memory or input/output address space VMIVME-7698 BIOS according to the standard ISA architecture that maps IRQx lines to appropriate devices. The initialization operation cannot be changed; However, custom applications can reroute BIOS to interrupt configuration after completing the initial configuration cycle.

Contribute to energy conservation and environmental protection

ARM with built-in low-power platform? The SoC 「AM3354 "of the processor (600MHz, T.I. Cortex-A8) ensures sufficient execution capacity and realizes low power consumption.

Fan-free design to reduce maintenance and security business

The CPU fan is abolished, the memory is designed with SD card and no rotating mechanism at all. In addition, when the waterproof gasket and waterproof screw attached to the product are used, the front part can prevent dust or foreign matter from invading, which can meet the waterproof specification of IP65 standard. Try to reduce the use of aging parts, greatly reducing the burden of maintenance and security business.

The space-saving design contributes to the miniaturization of the device.

A small, lightweight [about 0.8kg] touch-screen integrated PC with a 5.7-inch LCD. Contribute to the miniaturization of the device. You can also use VESA standard 100×100mm installation structure to install on the LCD bracket.

Configure standard expansion interfaces of computers such as USB and LAN.

The interface functions such as USB×1, 100BASE-T×1 and RS-232C×1 are configured. At the same time, the driver software of each interface is attached.

Comes with a software tool "CONTEC Manager" to support system development.

It is equipped with FTP server function, schedule function, automatic time adjustment function using NTP, Auto RUN function, etc., which is helpful to the software tool "CONTEC Manager" of component system.