PLX32-EIP-PND   |   PM866K01 3BSE050198R1   控制模块

规格   描述

型号：PLX32-EIP-PND

电源： 标称值24 VDC

允许：10 至 36 VDC

正、负和 GND 端子

标称值24 VDC @ 300 mA

EtherNet/IP™ to PROFINET

Device Gateway for dual

电流负载 subnets

10 至 36 VDC @ 最大值610 mA

-25°C 至 70°C (-13°F 至 158°F)

-40°C 至 80°C (-40°F 至 176°F)

5% 至 95% RH 无冷凝

IEC 60068-2-27; 15G @ 11ms, 3-Axis (工作)

IEC 60068-2-27; 30G @ 18ms, 3-Axis (非工作)

IEC 60068-2-6; 5G @ 10Hz 至 150Hz

工作温度

存储温度

相对湿度

抗冲击性

尺寸

(H x W x D)

5.38 x 1.99 x 4.38 英寸

13.67 x 5.05 x 11.13 厘米

EtherNet/IP™转PROFINET® IO设备(从站)网关可实现在EtherNet/IP™控制器与

PROFINET® IO控制器之间进行双向数据传输。EtherNet/IP 驱动应用1类 I/O连接或者3类

消息指令。PROFINET驱动可做为PROFINET A类设备。

PLX32-EIP-PND是一款独立的DIN-导轨安装模块，提供两个以态网端口，每个端口对应

于不同的子网。内置SD卡卡槽(SD卡为选配件)，用于存储组态文件，在其它网关间恢复

和转送配置或者备份配置。

ODVA 认证

PROFINET A 类规约的PROFINET v2 认证

EtherNet/IP 和PROFINET 认证确保设备和各自网络兼容

与多厂家的PROFINET控制器现场测试

远程诊断EtherNet/IP和PROFINET网络

嵌入式EDS AOP与 Studio 5000和RSLogix 5000无缝对接

使用I/O连接时，无需梯形图编程

多I/O连接时允许增加吞吐量

Specification description

Model: PLX32-IP-PND

Power supply: Nominal 24 VDC

Allow: 10 to 36 VDC

Positive, negative and GND terminals

Nominal value 24 VDC @ 300 mA

EtherNet/IP™ to PROFINET

Device Gateway for dual

Current load subnets

10 to 36 VDC @ Maximum 610 mA

-25°C to 70°C (-13°F to 158°F)

-40°C to 80°C (-40°F to 176°F)

5% to 95% RH non-condensing

IEC 60068-2-27;  15G @ 11ms, 3-Axis (working)

IEC 60068-2-27;  30G @ 18ms, 3-Axis (Non-working)

IEC 60068-2-6;  5G@10Hz to 150Hz

Operating temperature

Storage temperature

Relative humidity

Impact resistance

dimension

(H x W x D)

5.38 x 1.99 x 4.38 inches

13.67 x 5.05 x 11.13 cm

EtherNet/IP™ to PROFINET® IO device (slave station) gateways can be implemented with EtherNet/IP™ controllers

Bidirectional data transfer between PROFINET® IO controllers. EtherNet/IP drives applications for Class 1 I/O connections or Class 3

Message instruction. PROFINET drivers can be used as PROFINET Class A devices.

The PLX32-IP-PND is an independent DIN-rail mounting module that offers two ports, one for each port

On different subnets. Built-in SD card slot (SD card is optional) for storing configuration files and restoring them between other gateways

And forward configuration or backup configuration.

ODVA certification

PROFINET v2 certification of the PROFINET Class A protocol

EtherNet/IP and PROFINET certifications ensure that devices are compatible with their respective networks

Field testing of PROFINET controllers with multiple manufacturers

Remote diagnosis of EtherNet/IP and PROFINET networks

The embedded EDS AOP works seamlessly with the Studio 5000 and RSLogix 5000

Ladder diagram programming is not required when using I/O connections

Allows increased throughput on multiple I/O connections