MP-2P1   | RF 功率分配器/分线器  | 库存现货

品牌：SHINKAWA

型号：  MP-2P1

类别：RF 功率分配器/分线器

插损:0.5dB

频率:1.35 GHz ~ 2.25 GHz

规格:隔离（最小）9dB，1.3 VSWR（典型值），4° 不平衡（最大）

大小 / 尺寸

0.114" 长 x 0.059" 宽 x 0.064" 高（2.90mm x 1.51mm x 1.63mm）

封装/外壳：SOT-23-6

详细描述：

RF 功率分配器/分线器 1.35 GHz ~ 2.25 GHz 隔离（最小）9dB，1.3 VSWR（典型值），4° 不平衡（最大） SOT-23-6。

MP-2P1 RF功率分配器/分线器是一种在射频微波领域中广泛应用的器件，其主要功能是将一路输入信号能量平均或按一定比例分配给多个输出端口，为多个天线或射频模块提供相等的信号能量。这种分配有助于消除系统中的不平衡现象，提高射频系统的稳定性。

MP-2P1 功率分配器的工作原理主要基于贝尔定理（又称为马克斯韦-贝特曼关系），该定理表明当一个谐振器与多个相同的谐振器相互作用时，它们之间的能量将等分地分配到每个谐振器上。功率分配器按输出可以分为二功分、三功分、四功分、六功分、八功分、十二功分等，其结构形式可以是同轴功率分配器或微带线功率分配器。

在同轴功率分配器中，多个相同的同轴线通过共同的内导体和外导体相连，输入信号通过中心导体进入同轴线系统，并被平均分配到各个输出端口上。而在微带线功率分配器中，多个相同的微带线通过共同的扩展板相连，输入信号通过微带线进入系统，并被平均分配到各个输出端口上。

总的来说，  MP-2P1 RF功率分配器/分线器在无线通信、雷达、卫星通信等射频微波领域扮演着重要的角色，是实现信号高效传输和处理的关键设备之一。

Brand: SHINKAWA

Model: MP-2P1

Category: RF Power dividers/splitters

Insertion loss :0.5dB

Frequency: 1.35GHz ~ 2.25GHz

Specifications: Isolated (min.) 9dB, 1.3VSWR (typical), 4° unbalanced (Max.)

Size/dimension

0.114" L x 0.059" W x 0.064" H (2.90mm x 1.51mm x 1.63mm)

Package/case: SOT-23-6

Detailed description:

RF Power divider/splitter 1.35 GHz ~ 2.25 GHz isolated (min) 9dB, 1.3 VSWR (typical), 4° unbalanced (Max) SOT-23-6.

MP-2P1 RF power divider/splitter is a device widely used in the field of radio frequency and microwave, its main function is to average or allocate a certain proportion of input signal energy to multiple output ports, to provide equal signal energy for multiple antennas or RF modules. This distribution helps to eliminate the imbalance in the system and improve the stability of the RF system.

The working principle of the MP-2P1 power divider is primarily based on Bell's theorem (also known as the Maxwell-Bateman relation), which states that when a resonator interacts with multiple identical resonators, the energy between them will be equally distributed to each resonator. According to the output, the power divider can be divided into two power points, three power points, four power points, six power points, eight power points, twelve power points, etc. Its structure form can be coaxial power divider or microstrip line power divider.

In a coaxial power distributor, multiple identical coaxial lines are connected through a common inner and outer conductor, and the input signal enters the coaxial line system through the central conductor and is evenly distributed across the output ports. In the microstrip line power divider, multiple identical microstrip lines are connected through a common expansion board, and the input signal enters the system through the microstrip line and is evenly distributed to each output port.

In general, MP-2P1 RF power divider/splitter plays an important role in radio frequency and microwave field such as wireless communication, radar, satellite communication, and is one of the key equipment to achieve efficient signal transmission and processing.