A06B-6140-H055   伺服放大器  可实现位置检测操作

型号：A06B-6140-H055

制造者：FANUC公司

类型:电源

保证 :1年

阶段 :三相

输入电压: 220 伏交流电

A06B-6140-H055 Alpha I 电源模块 AIPS -55 是 FANUC 制造的伺服放大器。凭借其时尚的设计，它旨在以节省空间的方式完美贴合，因为只有像这样的紧凑型装置才能做到。该电源体积小巧，可节省多达 30% 的安装空间，与大型型号相比，散发的热量要少得多。作为节省空间和改进功能的另一项措施，电缆线的长度已减少。电缆连接器通过其更新的架构更容易地安装到控制板中，从而减少对连接框架的投影。此外，放大器只需要一根电缆即可连接。另一个减少电缆的功能是能够使用更少的外部电缆，因为不再需要它。这是由于包含从电机输出端子到法兰的接地连接。这些产品在日本制造，专为商品生产、高级加工和 CNC 铣削使用而设计。它们提供 MRO Electric 的 2 年保修。我们还提供其他制造商的电源，例如西门子和控制技术。

电源线现在比以往任何时候都更简单，连接到输入电源线的连接器节省了连接时间。从伺服放大器机柜上拆下也会花费更少的时间，因为输入电源线和电机电源线在快速连接器处分离。现在，维护您的设备也具有改进的功能，包括以极致简单的方式替换风扇电机，从而大大减少了更换风扇电机通常所需的时间。A06B-6140-H055更换伺服放大器所需的时间要少得多，因为连接器连接到输入电源线，连接器连接到电机电源线。不仅如此，更换伺服放大器后，现在无需执行参考位置返回操作。伺服放大器上的绝对脉冲编码器中有一个备用电容器，可实现近 10 分钟的位置检测操作，无需参考位置返回操作。伺服放大器的架构是这样的，它必须安装在功率磁性柜中，其散热器从柜的背面出来。这样，来自半导体的热量就会被正确地带走，您可以确定热量不会积聚到您身上。伺服放大器有一个电容器，有助于平滑电源电路。请注意，当您关闭设备的电源时，它可能仍会充电一段时间。为安全起见，请等待几秒钟让电放电，并且在任何时候都不要触摸它，直到您看到红色 LED 已熄灭，这表明电量已消散。

Model: A06B-6140-H055

Manufacturer: FANUC Corporation

Type: Power Supply

Guarantee :1 year

Phase: Three phase

Input voltage: 220 V AC

A06B-6140-H055 Alpha I Power module AIPS-55 is a servo amplifier manufactured by FANUC. With its stylish design, it aims to fit perfectly in a space-saving way, as only a compact device like this can. The compact size of the power supply saves up to 30 percent of installation space and emits much less heat than larger models. As another measure to save space and improve functionality, the length of cable lines has been reduced. The cable connector is more easily installed into the control board through its updated architecture, thus reducing the projection of the connecting frame. In addition, the amplifier only requires a single cable to connect. Another cable-reducing feature is the ability to use less external cable because it is no longer needed. This is due to the inclusion of a ground connection from the motor output terminal to the flange. These products are manufactured in Japan and designed for use in commodity production, advanced machining and CNC milling. They come with a 2-year warranty on the MRO Electric. We also supply power supplies from other manufacturers, such as Siemens and Control Technologies.

Power cords are now simpler than ever, and connectors that connect to the input power cord save connection time. It also takes less time to remove from the servo amplifier cabinet because the input power cord and motor power cord are separated at the quick connector. Now, the maintenance of your equipment also has improved features, including the replacement of the fan motor in an extremely simple way, which greatly reduces the time normally required to replace the fan motor. The A06B-6140-H055 requires much less time to replace the servo amplifier because the connector is connected to the input power line and the connector is connected to the motor power line. Not only that, after replacing the servo amplifier, there is now no need to perform the reference position return operation. A spare capacitor in the absolute pulse encoder on the servo amplifier enables nearly 10 minutes of position detection operation without reference to the position return operation. The architecture of the servo amplifier is such that it must be installed in a power magnetic cabinet with its radiator coming out of the back of the cabinet. This way, the heat from the semiconductor is taken away correctly and you can be sure that the heat will not build up on you. The servo amplifier has a capacitor that helps smooth the power supply circuit. Note that when you turn off the power to your device, it may still charge for some time. To be on the safe side, wait a few seconds for the electricity to discharge, and do not touch it at any time until you see that the red LED has gone out, which indicates that the electricity has dissipated.