RDCO-01C   光纤链路两端的光学组件  RDCU控制单元

概述

型号：RDCO-01C

RDCO-0x DDCS通信选项是为

RMIO电机控制和VO板(也是RDCU控制单元的一部分)

BCU控制单元

RDCO模块可在工厂安装，也可提供改装套件。

RDCO模块包括用于光纤DDCS通道CHO、CH1、CH2和CH3的连接器。这些通道的使用情况由应用程序决定;请参阅驱动器的固件手册。但是，通道通常分配如下:

CHO覆盖系统(如现场总线适配器)

CH1-10选项和供应单元

CH2-主从链路

CH3-PC工具(仅限ACS800)

有几种类型的RDCO。这两种类型之间的区别在于光学元件。此外，每一种都有一个涂层电路板，这是由一个“c”后缀表示，例如。RDCO-03C。

RDCO-01C光纤链路两端的光学组件必须是相同类型的，以使光强度和接收器灵敏度水平相匹配。塑料光纤(POF)电缆可用于5 MBd和10 MBd光学元件10 MBd元件还可以使用硬包硅(HCS)电缆，由于其较低的衰减，允许更长的连接距离。

summarize

Model: RDCO-01C

RDCO-0x The DDCS communication option is

RMIO Motor control and VO board (also part of RDCU control unit)

BCU control unit

RDCO modules are factory-installed or retrofit kits are available.

The RDCO module includes connectors for the optical fiber DDCS channels CHO, CH1, CH2, and CH3. The use of these channels is determined by the application; Refer to the firmware manual for your drive. However, channels are usually assigned as follows:

CHO overlay system (e.g., fieldbus adapter)

CH1-10 Options and supply units

CH2- Primary/secondary link

CH3-PC tool (ACS800 only)

There are several types of RDCO. The difference between the two types is the optical element. In addition, each has a coated circuit board, which is indicated by a "c" suffix, for example. RDCO-03C.

The optical components at both ends of the RDCO-01C fiber link must be of the same type so that the light intensity and receiver sensitivity level match. Plastic fiber optic (POF) cables are available for 5 MBd and 10 MBd optical components. 10 MBd components can also use hard clad silicon (HCS) cables, which allow for longer connection distances due to their lower attenuation.