57C410A   模拟输入模块  支持多种采集量程

型号：57C410A

该2通道模拟输入模块用于向DCS 5000/AutoMax系统中的本地机架输入模拟信号。  该模块包含两个通道，可以每500微秒转换一次。  每个通道提供12位转换加号，100%超量程，和用户可编程的滤波器和转换器。两个输入通道有一个隔离公共通道。  模块的输入可以是土1伏+5伏，土10伏或4-20毫安。  该模块可以配置为在每次转换时中断。

通常，该模块用于读取模拟电压电位器、转速表、驱动控制系统和过程控制系统。

57C410A模拟输入模块是一款将远程现场的模拟量信号采集至计算机的设备，其利用RS-485总线作为数据通信线路，提供模拟量转485功能，能够同时将模拟量输入至模块，并通过RS-485总线传输至计算机。

57C410A模拟输入模块支持多种采集量程、各类组态软件对接，其通信协议采用MODBUSRTU协议，与工业现场数据采集实现了统一对接，编程起来也很方便。模拟输入模块通常用于解决PLC、运动控制器模拟输入等问题，比如电流检测、电压检测、温度检测等。

关于57C410A的常见问题

57C410A有什么类型的输出滤波器?

57C410A有一个100Hz的一阶低通输出滤波器。

57C410A有什么类型的隔离电压?

57C410A具有逻辑到通道和通道到通道隔离电压。57C410A上的隔离电压运行在2500 VAC有效值。

57C410A有几个频道?

57C410A有四个模拟输出通道

57C410A提供什么输出信号?

57C410A提供回路控制、过程指示和记录的输出信号。57C410A为这些提供多通道可变输出信号。

Model: 57C410A

The 2-channel analog input module is used to input analog signals to the local rack in the DCS 5000/AutoMax system. The module contains two channels that can be converted every 500 microseconds. Each channel offers 12-bit conversion plus signs, 100% overrange, and user-programmable filters and converters. The two input channels have an isolated common channel. Module inputs can be earth 1 V +5 V, Earth 10 V or 4-20 MA. The module can be configured to interrupt on each conversion.

Typically, the module is used to read analog voltage potentiometers, tachometers, drive control systems, and process control systems.

57C410A analog input module is a device that collects analog signals from remote field to computer, which uses RS-485 bus as a data communication line to provide analog to 485 function, which can input analog data to the module at the same time and transmit it to the computer through RS-485 bus.

57C410A analog input module supports a variety of acquisition ranges, all kinds of configuration software docking, its communication protocol using MODBUSRTU protocol, and industrial field data acquisition to achieve a unified docking, programming is also very convenient. Analog input module is usually used to solve the PLC, motion controller analog input and other problems, such as current detection, voltage detection, temperature detection.

Frequently Asked Questions about 57C410A

What type of output filter does 57C410A have?

The 57C410A has a 100Hz first-order low-pass output filter.

What type of isolation voltage is available for 57C410A?

57C410A has logical to channel and channel to channel isolation voltage. The isolation voltage on the 57C410A runs at 2500 VAC RMS.

How many channels does 57C410A have?

The 57C410A has four analog output channels

What output signal does 57C410A provide?

57C410A provides output signals for loop control, process indication and recording. The 57C410A provides a multichannel variable output signal for these.