高压衰减器接线端子 SCXI-1304 访问模块的数字接地和数字信号

National Instruments SCXI-1304 接线端子

这款 National Instruments SCXI-1304 接线端子已使用且状况良好。本机缺少侧面板;但是，这并不影响其正常运行的能力。

部件号： 185963A-01， 777687-04

SCXI-1304（部件号：777687-04）是National Instruments的SCXI系列接线端子。该AC/DC耦合接线端子可与SCXI-1140、SCXI-1141/1142/1143、SCXI-1120/D和SCXI-1125模块一起使用。 除 AC/DC 耦合外，该型号还具有 BNC 连接器和信号接地参考，可为每个通道进行配置。NI SCXI-1304 上有 22 个 螺丝 端子， 可 轻松 连接 信号。用户可以使用八对螺丝端子将信号连接到八个模块输入，并使用一对连接到模块模拟接地。其他四个螺丝端子用于访问模块的数字接地和数字信号。对于SCXI-1140，这些信号是HOLDTRIG。但是，对于SCXI-1141/1142/1143，这些信号是OUTCLK和EXTCLK。

当NI SCXI 1304接线端子与SCXI-1120/D、SCXI-1125或SCXI-1126一起使用时，如果偏置电阻处于接合设置中，则通道隔离规范无效。 用户必须将电阻开关保持在开路或 G 接地设置，以便隔离保持有效。

SCXI-1304高压衰减器接线端子是指用于连接高压衰减器的输入和输出电缆的接口。这些接线端子通常具有特殊的设计和材料，以确保在高压环境下安全可靠地连接电缆。

SCXI-1304高压衰减器是一种用于降低高电压信号的电子设备，它通常用于保护测量仪器和其他电子设备免受高压信号的损坏。高压衰减器接线端子的作用是提供安全可靠的连接，以确保高压信号能够正确地传输到高压衰减器中，并从高压衰减器中传输出来。

高压衰减器接线端子通常具有高绝缘性能、耐高压性能和良好的导电性，以确保在高压环境下安全可靠地连接电缆。在选择高压衰减器接线端子时，需要考虑电缆的规格和类型、高压衰减器的输入和输出电压等因素，以确保接线端子能够满足系统的要求。

高压衰减器接线端子 SCXI-1304 访问模块的数字接地和数字信号

National Instruments SCXI-1304 wiring terminals

This National Instruments SCXI-1304 terminal is used and in good condition. The machine lacks side plate; However, this does not affect its ability to operate normally.

Part number: 185963A-01, 777687-04

The SCXI-1304 (Part number: 777687-04) is the SCXI series of terminals from National Instruments. The AC/DC coupled terminals can be used with SCXI-1140, SCXI-1141/1142/1143, SCXI-1120/D and SCXI-1125 modules. In addition to AC/DC coupling, this model has a BNC connector and signal ground reference that can be configured for each channel. The NI SCXI-1304 has 22 screw terminals for easy signal connection. Users can use eight pairs of screw terminals to connect signals to eight module inputs and a pair of connections to modules to simulate grounding. The other four screw terminals are used to access the module's digital ground and digital signals. For SCXI-1140, these signals are HOLDTRIG. However, for SCXI-1141/1142/1143, these signals are OUTCLK and EXTCLK.

When NI SCXI 1304 terminals are used with SCXI-1120/D, SCXI-1125, or SCXI-1126, the channel isolation specification is invalid if the bias resistance is in the engaged setting. The user must keep the resistance switch in an open or G ground setting for the isolation to remain effective.

SCXI-1304 High voltage attenuator terminal refers to the interface for connecting the input and output cables of the high voltage attenuator. These terminals usually have special designs and materials to ensure safe and reliable cable connection in high voltage environments.

The SCXI-1304 High voltage attenuator is an electronic device used to reduce high voltage signals, it is usually used to protect measuring instruments and other electronic equipment from damage of high voltage signals. The role of the high voltage attenuator terminal is to provide a safe and reliable connection to ensure that the high voltage signal can be correctly transmitted to and from the high voltage attenuator.

High voltage attenuator terminals usually have high insulation properties, high voltage resistance and good electrical conductivity to ensure safe and reliable cable connection in high voltage environments. When selecting the high-voltage attenuator terminal, you need to consider the specifications and types of cables, the input and output voltages of the high-voltage attenuator, and other factors to ensure that the terminal can meet the requirements of the system.