高压衰减器接线端子 SCXI-1327  降低高电压信号的电子设备

National Instruments SCXI-1327 高压衰减器接线端子

这款 National Instruments SCXI-1327 高压衰减器接线端子使用完好，状况良好。

部件编号： 182363D-01， 185136B-01， 185136A-01National Instruments SCXI-1327 高压衰减器接线端子

SCXI-1327（部件号：777687-27、185136A-01）屏蔽接线端子有 18 个螺丝端子，可连接到以下模块的输入连接器：SCXI-1120、SCXI-1120D、SCXI-1121、SCXI-1125 或 SCXI-1126。 用户必须旁路激励通道上的衰减器，才能使用SCXI-1121进行精确操作。SCXI 1327 可将 SCXI-1120/D 和 SCXI-1121 的输入范围扩展至 ±250 V。该接线端子还可以将SCXI-1126模块的阈值电平从5 V一直扩展到300 V。NI SCXI-1327 中 有 开关 可 分别 允许 或 禁止 每个 通道 的 扩展 输入 电压 范围。SCXI-1327 还 将 用户 的 SCXI 模 块 的 输入 阻抗 降低 到 1 M。

SCXI-1327使用NIDAQmx驱动程序软件运行，该软件可以使用LabVIEW或LabWindows/CVI等软件包/应用程序开发环境（ADE）进行编程。NI 设备 重 7 盎司， 尺寸为 7.0 x 3.125 x 1.2 英寸。在物理维度上。建议的工作和存储温度范围分别为 0 至 50 °C 和 –20 至 70 °C，非冷凝湿度范围为 5 至 90%。

高压衰减器接线端子是指用于连接高压衰减器的输入和输出电缆的接口。这些接线端子通常具有特殊的设计和材料，以确保在高压环境下安全可靠地连接电缆。

SCXI-1327高压衰减器是一种用于降低高电压信号的电子设备，它通常用于保护测量仪器和其他电子设备免受高压信号的损坏。高压衰减器接线端子的作用是提供安全可靠的连接，以确保高压信号能够正确地传输到高压衰减器中，并从高压衰减器中传输出来。

SCXI-1327高压衰减器接线端子通常具有高绝缘性能、耐高压性能和良好的导电性，以确保在高压环境下安全可靠地连接电缆。在选择高压衰减器接线端子时，需要考虑电缆的规格和类型、高压衰减器的输入和输出电压等因素，以确保接线端子能够满足系统的要求。

高压衰减器接线端子 SCXI-1327  降低高电压信号的电子设备

National Instruments SCXI-1327 High voltage attenuator terminal

The National Instruments SCXI-1327 high voltage attenuator terminals are in good condition.

Part Number: 182363D-01, 185136B-01, 185136A-01National Instruments SCXI-1327 High voltage attenuator terminal

SCXI-1327 (Part number: 777687-27, 185136A-01) Shielded terminal blocks have 18 screw terminals that can be connected to input connectors of the following modules: SCXI-1120, SCXI-1120D, SCXI-1121, SCXI-1125, or SCXI-1126. The user must bypass the attenuator on the excitation channel for accurate operation with the SCXI-1121. The SCXI 1327 extends the input range of the SCXI-1120/D and the SCXI-1121 to ±250 V. The terminal can also extend the threshold level of the SCXI-1126 module from 5 V all the way up to 300 V. There are switches in NI SCXI-1327 that allow or disallow extended input voltage ranges for each channel, respectively. The SCXI-1327 also reduces the input impedance of the user's SCXI module to 1 M.

The SCXI-1327 runs using NIDAQmx driver software, which can be programmed using a package/application development environment (ADE) such as LabVIEW or LabWindows/CVI. The NI device weighs 7 ounces and measures 7.0 x 3.125 x 1.2 inches. In the physical dimension. The recommended operating and storage temperature ranges are 0 to 50 °C and -20 to 70 °C, respectively, and the non-condensing humidity range is 5 to 90%.

High voltage attenuator terminal refers to the interface for connecting the input and output cables of the high voltage attenuator. These terminals usually have special designs and materials to ensure safe and reliable cable connection in high voltage environments.

The SCXI-1327 High voltage attenuator is an electronic device used to reduce high voltage signals, it is commonly used to protect measuring instruments and other electronic equipment from damage of high voltage signals. The role of the high voltage attenuator terminal is to provide a safe and reliable connection to ensure that the high voltage signal can be correctly transmitted to and from the high voltage attenuator.

SCXI-1327 High voltage attenuator terminals usually have high insulation properties, high voltage resistance and good electrical conductivity to ensure safe and reliable cable connection in high voltage environments. When selecting the high-voltage attenuator terminal, you need to consider the specifications and types of cables, the input and output voltages of the high-voltage attenuator, and other factors to ensure that the terminal can meet the requirements of the system.