PCI-6230  多功能I/O设备  实用程序简化了配置和测量

PCI-6230 多功能I/O设备，8路AI，（16位，250 kS/s），4路DIO，组隔离，5 V TTL/CMOS PCI多功能I/O设备—PCI-6230提供了模拟输入、数字输出、两个32位计数器/定时器和组隔离。随附的NI-DAQmx驱动程序和配置实用程序简化了配置和测量。

National lnstruments PCl-6230多功能数据采集系统

National lnstruments PC+6230(部件号:779615-01、192236401)是M系列的组隔离式多功能数据采集板。该器件将隔离的性能和安全优势与精确精密控制和测量所需的高性能放大、定时和校准技术完美结合。NIPC+6230集成的组隔离功能可带来噪声抑制、瞬变安全、减少接地环路以及共模电压抑制。

该器件是高压和高电噪声环境中应用的理想解决方案。NIPCl6230 DAQ可与接近传感器、控制阀、泵、流星计、继电器等配合使用。该DAQ板通

寸16位分辨率ADC提供8个单端或4个差分模拟输入，具有±10V、5V和f1V、0.2V输入范围、直流耦合和250KS /s的最大采样率，定时精度为50pm。NIPC.6230具有高达6OVDC的连续组隔离和高达1950 VDC的通道到总线隔离。

该型号设计有四个模拟输出通道，由16位数模转换器提供支持。每个模拟输出通道可实现的最大更新速率为500kS/s。用户可以实现每通道450、425和40OKS/s的更新速率，同时分别使用两个、三个或四个通道。NIPC+6230支持DC输出耦合，输出范围为±10V。该器件中包含的输出FFO可以处理8191，并在通道之间共享。对于边沿、半周期、周期和其他计数器测量，PC+6230具有两个32位计数器/定时器，工作频率为8O MHz。该设备配备了一个37针D-SUBV/0连接器。

PC)-620使用NIDAOIm驱动程序软件运行，该软件可以使用软件包或应用程序开发环境(ADE)进行编程，例如LabVIEW或lLabWindows/CVI。NI设备重0.24磅，尺寸为3.8x6.1英寸。在物理维度上。建议工作温度范围为0至55°℃.PCl-6230

PCI-6230  多功能I/O设备  实用程序简化了配置和测量

Pci-6230 Multi-function I/O device, 8-channel AI, (16-bit, 250 kS/s), 4-channel DIO, Group isolation, 5 V TTL/CMOS PCI Multi-function I/O device - The PCI-6230 provides analog input, digital output, two 32-bit counters/timers, and group isolation. The included NI-DAQmx driver and configuration utility simplify configuration and measurement.

National lnstruments PCl-6230 multi-function data acquisition system

The National lnstruments PC+6230(Part No. 779615-01, 192236401) is a group isolated multi-function data acquisition board of the M series. The device combines the performance and safety benefits of isolation with the high-performance amplification, timing and calibration technologies needed for precise precision control and measurement. The NIPC+6230's integrated group isolation provides noise suppression, transient safety, reduced ground loops, and common mode voltage suppression.

The device is an ideal solution for applications in high voltage and high electrical noise environments. NIPCl6230 DAQ can be used with proximity sensors, control valves, pumps, meteorometers, relays, etc. The DAQ board passes

Inch 16 bit resolution ADC

For 8 single-ended or 4 differential analog inputs with ±10V, 5V and f1V, 0.2V input range, DC coupling and a maximum sampling rate of 250KS /s with a timing accuracy of 50pm. The NIPC.6230 features continuous group isolation up to 6OVDC and channel to bus isolation up to 1950 VDC.

The model is designed with four analog output channels supported by a 16-bit digital-to-analog converter. Each analog output channel can achieve a maximum update rate of 500kS/s. Users can achieve update rates of 450, 425 and 40OKS/s per channel while using two, three or four channels, respectively. The NIPC+6230 supports DC output coupling with an output range of ±10V. The output FFO contained in this device can handle 8191 and is shared between channels. For edge, half-period, period and other counter measurements, the PC+6230 has two 32-bit counters/timers operating at 8O MHz. The device is equipped with a 37-pin D-SUBV/0 connector.

PC)-620 runs with NIDAOIm driver software that can be programmed using a software package or application development environment (ADE), such as LabVIEW or lLabWindows/CVI. The NI device weighs 0.24 pounds and measures 3.8x6.1 inches. In the physical dimension. The recommended operating temperature range is 0 to 55° C. PCl-6230