CFP-AO-200  模拟输出模块  用于接线和传感器调查

Compact FieldPoint 8通道电流模拟输出模块—CFP-AO-200包括线路开路检测、传感器故障诊断和接线错误时的短路保护。每个通道是独立配置的，而且所有模块的输出通道和背板之间具有瞬时隔离。为了简化安装和设置，cFP-AO-200采用HotPnP（即插即用）操作，并可自动检测和识别配置软件。

National lnstruments cFP-AO-200模拟输出模块，用于紧凑型视场点

GFPAO-200 (部件号:7731-200)包含一个开路位置，用于接线和传感器调查和短路保险接线错误。每个通道都可以单独配置。为了降低建立和设置的要求，N cFP-AO-200突出了HotPhP(试穿和播放)任务，因此它通过编排编程得到认可和区分。使用oFPAO-200模块，用户可以直接与机械执行器或被测单元连接，并获得高精度功率。O模块根据传感器信号调整和缩放构建单元，同时还执行自诊断以搜索模块或接线问题，例如开路动量圈。Nl cFP AO 200模块的更新速率为200 Hz。通常，控制器或PC的信息吞吐量取决于产品循环速度和系统速度。

该模块包含8个0至20 mA或4至20 mA简单良率输出通道〈超量程为0.5mA)，由12位DAC产生，更新速率为200Hz。每个屈服通道都包含一个检查电路和LED标记，用于开路电流环位置。NIcFP-AO-20需要提供5至24VDC的外部电源。它具有短路保护，并在模块间通信总线和V/O通道之间具有2.300 Vms瞬态过压保护。N设备的最大转换速率为每秒200次更新，压摆率为0.4 mA/微秒。

紧凑型FieldPoint模块包含隐式电力传输，可在模块上提供不同的电源关联。与电压(V)和正常(C)端子关联的现场有线电源内部与电源循环传翰相关联，该传输为电压电源(VSUP）和正常(COM)提供额外的分支端子。这些终端提供了一种有用的方法来分散容量以处理需要外部电源的小工具。该设备重3.7盎司，尺寸为5.00×260x0.94英寸。在物理维度上。推荐的工作温度范围为-40至70 °C，存储温度范围为–55至100 °℃。

CFP-AO-200  模拟输出模块  用于接线和传感器调查

The Compact FieldPoint 8-channel current analog output module - CFP-AO-200 includes open line detection, sensor fault diagnosis and short circuit protection in case of wiring errors. Each channel is configured independently, and all modules have an instantaneous separation between the output channel and the backplane. To simplify installation and setup, the cFP-AO-200 uses HotPnP (Plug and play) operation and automatically detects and recognizes configuration software.

National lnstruments cFP-AO-200 analog output module for compact field of view

The GFPAO-200 (Part number :7731-200) contains an open position for wiring and sensor investigation and short circuit insurance wiring errors. Each channel can be configured individually. In order to reduce the build and setup requirements, the NcFP-AO-200 highlights the HotPhP(try on and play) task, so it is recognized and distinguished by choreography programming. With the oFPAO-200 module, users can connect directly to the mechanical actuator or the unit under test and obtain high-precision power. The O-module adjusts and scales the building unit based on sensor signals, while also performing self-diagnostics to search for module or wiring problems, such as open momentum loops. The Nl cFP AO 200 module has an update rate of 200 Hz. Typically, the information throughput of a controller or PC depends on the product cycle speed and the system speed.

The module contains eight 0 to 20 mA or 4 to 20 mA simple yield output channels < overrange 0.5mA), generated by a 12-bit DAC with an update rate of 200Hz. Each yield channel contains a check circuit and LED marker for the open current loop location. The NIcFP-AO-20 requires an external power supply of 5 to 24VDC. It has short circuit protection and 2.300 Vms transient overvoltage protection between the intermodule communication bus and the V/O channel. N The device has a maximum conversion rate of 200 updates per second and a voltage swing rate of 0.4 mA/ microsecond.

The compact FieldPoint module contains implicit power transmission that provides different power associations on the module. A field wired power supply associated with voltage (V) and normal (C) terminals is internally associated with a power cycle transmission that provides additional branch terminals for voltage supply (VSUP) and normal (COM). These terminals provide a useful way to spread out capacity to handle gadgets that require external power. The device weighs 3.7 ounces and measures 5.00 x 260x0.94 inches. In the physical dimension. The recommended operating temperature range is -40 to 70 °C and the storage temperature range is -55 to 100 °C.

The Compact FieldPoint 8-channel current analog output module - CFP-AO-200 includes open line detection, sensor fault diagnosis and short circuit protection in case of wiring errors. Each channel is configured independently, and all modules have an instantaneous separation between the output channel and the backplane. To simplify installation and setup, the cFP-AO-200 uses HotPnP (Plug and play) operation and automatically detects and recognizes configuration software.

National lnstruments cFP-AO-200 analog output module for compact field of view

The GFPAO-200 (Part number :7731-200) contains an open position for wiring and sensor investigation and short circuit insurance wiring errors. Each channel can be configured individually. In order to reduce the build and setup requirements, the NcFP-AO-200 highlights the HotPhP(try on and play) task, so it is recognized and distinguished by choreography programming. With the oFPAO-200 module, users can connect directly to the mechanical actuator or the unit under test and obtain high-precision power. The O-module adjusts and scales the building unit based on sensor signals, while also performing self-diagnostics to search for module or wiring problems, such as open momentum loops. The Nl cFP AO 200 module has an update rate of 200 Hz. Typically, the information throughput of a controller or PC depends on the product cycle speed and the system speed.

The module contains eight 0 to 20 mA or 4 to 20 mA simple yield output channels < overrange 0.5mA), generated by a 12-bit DAC with an update rate of 200Hz. Each yield channel contains a check circuit and LED marker for the open current loop location. The NIcFP-AO-20 requires an external power supply of 5 to 24VDC. It has short circuit protection and 2.300 Vms transient overvoltage protection between the intermodule communication bus and the V/O channel. N The device has a maximum conversion rate of 200 updates per second and a voltage swing rate of 0.4 mA/ microsecond.

The compact FieldPoint module contains implicit power transmission that provides different power associations on the module. A field wired power supply associated with voltage (V) and normal (C) terminals is internally associated with a power cycle transmission that provides additional branch terminals for voltage supply (VSUP) and normal (COM). These terminals provide a useful way to spread out capacity to handle gadgets that require external power. The device weighs 3.7 ounces and measures 5.00 x 260x0.94 inches. In the physical dimension. The recommended operating temperature range is -40 to 70 °C and the storage temperature range is -55 to 100 °C.