PCI-MIO-16E-4 数据采集设备 具有 3 个 DMA 通道（分散-聚集模式）

National Instruments PCI-MIO-16E-4 12位多功能DAQ

PCI-MIO-16E-4现在称为PCI-6040E。

配置： • PCI 卡电压：仅

5 V 部件号：

184002B-01、184002C-01、184002E-01、184002F-01、184002G-01

PCI-MIO-16E-4是NI公司的一款数据采集设备，通过USB或以太网连接PC或笔记本电脑，具有16路模拟输入、4路模拟输出、16路数字输入、16路数字输出。

National Instruments PCI-MIO-16E-4（部件号：PCI-6040E和777383-01）是一款多功能、即插即用、PCI控制和供电的数据采集设备。该器件在多通道模式下运行时可采集 250 kS/s，在单通道扫描模式下运行时可采集 500 kS/s。PCI-MIO-16E-4 具有 16 个差分或 8 个单端模拟输入通道，分辨率为 12 位，以及 8 条 5 V TTL/CMOS 数字 I/O 线。此外，还提供 2 个 12 位分辨率的模拟输出通道，采样率为 512 个 Samples/s，输出范围为 ±10 V。它有 3 个 DMA 通道（分散-聚集模式）。

这种多功能I/O设备倾向于与各种NI设备无缝同步运行。对于定时相关功能和同步，它配备了 2 个定时 I/O 通道，分辨率为 24 位，频率为 20 MHz。它具有 600 kHz 的小输入信号带宽和 350 kHz 的大输入信号带宽。此外， NI PCI-MIO-16E-4 可 处理 外部 生成 的 定 时 信号。该器件中的模拟输出可用于生成频率为每秒 1 MS 的波形。两个内部计数器带有两个输入（栅极和源极）、两个软件寄存器和一个输出，用于不同的应用。该设备配有一个 68 针公 0.050 D 型连接器。

PCI-MIO-16E-4 数据采集设备 具有 3 个 DMA 通道（分散-聚集模式）

National Instruments PCI-MIO-16E-4 12-bit multi-function DAQ

PCI-MIO-16E-4 is now called PCI-6040E.

Configuration: • PCI card voltage: Only

5 V Part Number:

184002B-01, 184002C-01, 184002E-01, 184002F-01, 184002G-01

The PCI-MIO-16E-4 is a data acquisition device from NI that connects to a PC or laptop via USB or Ethernet and has 16 analog inputs, 4 analog outputs, 16 digital inputs, and 16 digital outputs.

National Instruments PCI-MIO-16E-4 (Part numbers: PCI-6040E and 777383-01) is a versatile, plug-and-play, PCI-controlled and powered data acquisition device. The device can capture 250 kS/s when running in multi-channel mode and 500 kS/s when running in single-channel scan mode. The PCI-MIO-16E-4 has 16 differential or eight single-ended analog input channels with a resolution of 12 bits, and eight 5 V TTL/CMOS digital I/O lines. In addition, two 12-bit resolution analog output channels are available with a sampling rate of 512 Samples/s and an output range of ±10 V. It has 3 DMA channels (dispersion-aggregation mode).

This versatile I/O device tends to operate seamlessly in sync with various NI devices. For timing related functions and synchronization, it is equipped with 2 timing I/O channels with 24-bit resolution and 20 MHz frequency. It has a small input signal bandwidth of 600 kHz and a large input signal bandwidth of 350 kHz. In addition, the NI PCI-MIO-16E-4 can handle externally generated timed signals. The analog output in this device can be used to generate waveforms with frequencies of 1 MS per second. Two internal counters with two inputs (gate and source), two software registers, and one output for different applications. The device is equipped with a 68-pin male 0.050D connector.