PCI-7344  伺服运动控制器 具有双处理器和一个实时板载操作系统

PCI-7344是美国国家仪器（NI）公司推出的一款步进/伺服运动控制器。

PCI-7344运动控制器是NI的中档运动产品之一，具有双处理器和一个实时板载操作系统，并具有多轴插值功能，推荐用于简单的步进或直流电机控制和复杂的多轴运动控制。

PCI-7344 运动控制器设备，4轴步进/伺服运动控制器设备—PCI‑7344同时适用于简单和复杂运动应用。 PCI‑7344包括两个处理器和一个实时板载系统，并具有多轴插值功能。 PCI‑7344为嵌入式实时运动操作或以主机为中心的编程环境提供了混合运动轨迹控制和完全协调的圆形、线性、点对点、齿轮和矢量空间控制。

NI PCI-7344（部件号：778916-04）是一款用于步进/伺服控制应用的高品质运动控制器，具有 3D 轮廓、3D 线性和圆周插值以及高达 62 ms 的 PID 环路更新速率。该设备非常适合需要快速轻松地创建强大应用程序的机器制造商和最终用户。该器件具有独特的结构，其中 DSP 和 CPU 协同工作，为用户提供优化的闭环控制、运动命令处理和自动化系统控制。NI PCI-7344 运动 控制 板 附带 了 集成 的 系统 安全 机制。例如，看门狗定时器功能具有 63 ms 超时，并将电路板重置为启动状态。

NI PCI-7344 具有 62.5 至 500 μs/ 采样 轨迹 更新范围， 最大 更新 范围 为 62.5 μs/ 轴。该运动控制器使用户能够在0至5 V的电压范围内以4 MHz的最大脉冲速率和120 ns的最大脉冲宽度采集步进输出。

每个位都可以单独编程。对于运动控制和数字 I/O，提供了两个独立的 68 针母头高密度 VHDCI I/O 连接器。该运动控制器中包含的运动 I/O 连接器包含控制多达四个步进和伺服运动所需的所有必要信号，包括：禁止输出、断点输出、电机命令输出、反向限制输入、原点限制输入等。为了 实现 NI 运动 控制器 PCI-7344 和 其他 NI 设备 之间的 高速 连接， 用户 可以 使用 随 附 的 RTSI 连接器。

PCI-7344  伺服运动控制器 具有双处理器和一个实时板载操作系统

The PCI-7344 is a stepper/servo motion controller from National Instruments (NI).

The PCI-7344 motion controller is one of NI's mid-range motion products, featuring dual processors and a real-time onboard operating system with multi-axis interpolation, recommended for both simple stepper or DC motor control and complex multi-axis motion control.

PCI-7344 Motion controller devices, 4-axis stepper/servo motion controller devices - PCI-7344 is suitable for both simple and complex motion applications. PCI‑7344 includes two processors and a real-time onboard system with multi-axis interpolation. PCI‑7344 provides hybrid motion trajectory control and fully coordinated circular, linear, point-to-point, gear, and vector space control for embedded real-time motion operations or host-centric programming environments.

The NI PCI-7344 (Part number: 778916-04) is a high-quality motion controller for stepper/servo control applications with 3D contour, 3D linear and circular interpolation, and PID loop update rates up to 62 ms. The device is ideal for machine builders and end users who need to create powerful applications quickly and easily. The device has a unique architecture in which the DSP and CPU work together to provide users with optimized closed-loop control, motion command processing, and automated system control. The NI PCI-7344 Motion control board comes with an integrated system security mechanism. For example, the watchdog timer feature has a 63 ms timeout and resets the board to the startup state.

The NI PCI-7344 has an update range of 62.5 to 500 μs/ axis with a maximum update range of 62.5 μs/ axis. The motion controller enables the user to capture the stepping output at a maximum pulse rate of 4 MHz and a maximum pulse width of 120 ns over a voltage range of 0 to 5 V.

Each bit can be programmed individually. For motion control and digital I/O, two separate 68-pin female high-density VHDCI I/O connectors are available. The motion I/O connector included in this motion controller contains all the necessary signals needed to control up to four stepper and servo motions, including: disable output, breakpoint output, motor command output, reverse limit input, origin limit input, etc. For high-speed connectivity between the NI motion controller PCI-7344 and other NI devices, users can use the included RTSI connector.