PCI-7334 运动控制器 用于与数据采集或图像采集

PCI-7334是美国NI公司推出的一款步进运动控制器，该设备是用于PCI总线计算机的步进电机和伺服电机控制器的组合，具有先进的运动控制、附加的运动VI库和易于使用的软件工具，为四个协调或独立的运动轴提供完全可编程的运动控制。

PCI-7334 运动控制器设备 ,4轴步进运动控制器设备—PCI‑7334专为点对点运动应用而设计。 PCI‑7334提供用于协调多个轴运动的线性插值功能、用于与数据采集或图像采集硬件直接通信的实时系统集成，以及用于确保高速平滑运动的高性能步进生成。

National Instruments PCI-7334（部件号：778417-01、186307C-06）是一款步进运动控制器，具有先进的运动控制、附加的运动VI库和易于使用的软件工具。该器件是用于PCI总线计算机的步进电机和伺服电机控制器的组合。NI PCI-7334 为 4 个 协调 或 独立 的 运动 轴 提供 了 完全 可 编 程 的 运动 控制。有了这个运动控制器，用户可以使用伺服设备或步进电机来处理复杂和任意的运动轨迹。

PCI-7334 该运动控制器提供的伺服轴可以控制伺服液压系统、伺服阀、伺服电机和各种其他伺服设备。伺服轴仅在闭环模式下工作，利用模拟输入或四次编码器进行速度和位置反馈，并提供 ±10 V 模拟命令输出。该器件中包含的步进轴可以控制步进电机，并在开环或闭环模式下运行。National Instruments PCI-7334 具有摩托罗拉 MC68331 32 位实时处理器，以及 ADSP-2185 DSP（数字信号处理器）和 FPGA。

PCI-7334 该运动控制器允许用户在实时、支持多任务的操作系统环境中同时执行多达 10 个运动程序。该器件具有非专用用户 I/O，具有 4 个模拟输入和 32 位数字 I/O。NI PCI-7334 运动控制器 上 提供 的 外部 数字 I/ O 和 运动 连接器 是 68 针 高密度 母 VHDCI 连接器。该器件可通过软件轻松配置，无需调整跳线。该设备需要存在应用程序开发环境，例如LabVIEW、LabWindows/CVI或FlexMotion软件。此外，您的计算机应具有PCI/PXI插槽或1394端口。该设备有 3 个连接器，用于进出运动系统;它们是：一个 68 针运动 I/O 连接器 - 它包含 4 个用于模拟输入/反馈的 12 位 A/D 输入通道、一个 68 针数字 I/O 连接器、一个 RTSI 连接器 - 有助于各种 NI 产品之间的同步。

PCI-7334 运动控制器 用于与数据采集或图像采集

Pci-7334 is a stepper motion controller from NI Corporation, a combination of stepper motor and servo motor controller for PCI bus computers, featuring advanced motion control, an additional motion VI library, and easy-to-use software tools that provide fully programmable motion control for four coordinated or independent motion axes.

PCI-7334 Motion controller devices, 4-axis stepping motion controller devices - PCI-7334 is designed for point-to-point motion applications. PCI‑7334 provides linear interpolation for coordinating motion across multiple axes, real-time system integration for direct communication with data acquisition or image acquisition hardware, and high-performance step generation for ensuring smooth motion at high speeds.

The National Instruments PCI-7334 (Part number: 778417-01, 186307C-06) is a stepping motion controller that features advanced motion control, an additional motion VI library, and easy-to-use software tools. The device is a combination of stepper motor and servo motor controller for PCI bus computers. The NI PCI-7334 provides fully programmable motion control for four coordinated or independent motion axes. With this motion controller, users can use servo devices or stepper motors to handle complex and arbitrary motion trajectories.

PCI-7334 This motion controller provides a servo shaft that controls servo hydraulics, servo valves, servo motors, and various other servo devices. The servo shaft operates only in closed-loop mode, with speed and position feedback using analog inputs or a quad encoder, and provides a ±10 V analog command output. The stepper shaft included in the device controls the stepper motor and operates in open or closed loop mode. The National Instruments PCI-7334 features a MOTOROLA MC68331 32-bit real-time processor, as well as an ADSP-2185 DSP (digital signal processor) and FPGA.

The PCI-7334 motion controller allows users to execute up to 10 motion programs simultaneously in a real-time, multi-tasking operating system environment. The device has non-dedicated user I/O with 4 analog inputs and 32-bit digital I/O. The external digital I/ O and motion connectors provided on the NI PCI-7334 motion controller are 68-pin high-density female VHDCI connectors. The device can be easily configured by software without the need to adjust the jumper. The device requires the presence of an application development environment, such as LabVIEW, LabWindows/CVI or FlexMotion software. In addition, your computer should have a PCI/PXI slot or a 1394 port. The device has 3 connectors for entering and exiting the motion system; They are: A 68-pin sports I/O connector - which contains four 12-bit A/D input channels for analog input/feedback, a 68-pin digital I/O connector, and an RTSI connector - which facilitates synchronization between various NI products.