PCI-6561 数字波形发生器/分析仪 连接 16 个低压差分信号数字引脚来实现分析功能

PCI-6561 数字波形设备

PCI-6561是一款200Mb/s数字波形发生器/分析仪。

PCI-6561具有以下特点：

最大传输速率为200Mb/s。

时钟频率为100MHz。

具有单倍及双倍数据速率模式。

拥有16个通道，可以进行通道方向控制。

具有触发和模式序列生成功能的高容量板载内存。

PCI-6561（部件号：778991-01、778991-02和778991-03）是National Instruments的一款100 MHz数字波形发生器。 该型号配备了 16 个内置数据通道。NI PCI-6561 数字波形发生器具有同步功能，通过连接 16 个低压差分信号数字引脚来实现分析功能。还有生成和获取渠道，以帮助满足研发要求的各种测试和分析程序。为采样时钟提供了各种生成源，包括：板载时钟、CLK IN 和 STROBE 机制。板载时钟通过内部压控晶体振荡器产生，并配有一个分频器。该设备配备 3 个 SMB 插孔和一个 12 个 InfiniBand I/o 连接器。

NI PCI-6561 波形 发生 器 对 不同 的 源 具有不同 的 频率 范围。板载时钟源的范围为 48 Hz 至 100 MHz。CLK IN端子的输入频率范围为20 kHz至100 MHz。STROBE 选项的频率范围为 48 Hz 至 100 MHz。这些 CLK 源提供 10 ps 的分辨率。该型号的典型锁定时间为 400 毫秒。参考时钟的频率范围为 10 MHz ± 50 ppm，占空比范围为 25% 至 75%。PCI-6561使用NI-HSDIO驱动程序软件运行，该软件与LabVIEW、LabWindows/CVI、Measurement Studio、Microsoft Visual C/C++和.NET等软件包/应用程序开发环境兼容。可以使用Measurement & Automation Explorer （MAX）工具配置设备硬件。

NI PCI 6561 数字波形发生器提供多种触发模式，以进一步增强仪器的操作能力。该模型的典型温暖时间为 15 分钟。它还为频率测量提供了卓越的精度，典型值为 ± 100 ppm。National Instruments PCI 6561 数字波形发生器重约 410 克，物理尺寸为 4.96 x 13.9 英寸。它的推荐工作温度范围为 0 °C 至 45 °C，存储温度范围为 -20 °C 至 70 °C。

PCI-6561 数字波形发生器/分析仪 连接 16 个低压差分信号数字引脚来实现分析功能

PCI-6561 digital waveform device

The PCI-6561 is a 200Mb/s digital waveform generator/analyzer.

PCI-6561 has the following features:

The maximum transfer rate is 200Mb/s.

The clock frequency is 100MHz.

Features single and double data rate modes.

With 16 channels, you can control channel direction.

High capacity on-board memory with trigger and pattern sequence generation capabilities.

PCI-6561 (part numbers 778991-01, 778991-02, and 778991-03) is a 100 MHz digital waveform generator from National Instruments. This model is equipped with 16 built-in data channels. The NI PCI-6561 digital waveform generator has synchronization function, and the analysis function is realized by connecting 16 low-voltage differential signal digital pins. There are also generation and acquisition channels to help meet various test and analysis programs for R&D requirements. Various generation sources are provided for sampling clocks, including: on-board clock, CLK IN, and STROBE mechanisms. The onboard clock is generated by an internal voltage-controlled crystal oscillator with a frequency divider. The device is equipped with 3 SMB jacks and a 12 InfiniBand I/o connector.

The NI PCI-6561 waveform generator has different frequency ranges for different sources. The onboard clock source ranges from 48 Hz to 100 MHz. The input frequency range of the CLK IN terminal is 20 kHz to 100 MHz. The STROBE option has a frequency range of 48 Hz to 100 MHz. These CLK sources provide a resolution of 10 ps. The typical lock time for this model is 400 milliseconds. The reference clock has a frequency range of 10 MHz ± 50 ppm and a duty cycle range of 25% to 75%. The PCI-6561 runs with NI-HSDIO driver software, which works with LabVIEW, LabWindows/CVI, Measurement Studio, Microsoft Visual C/C++, and CVI. NET and other software packages/application development environment compatible. Device hardware can be configured using the Measurement & Automation Explorer (MAX) tool.

The NI PCI 6561 digital waveform generator offers a variety of trigger modes to further enhance instrument operation. The typical warm time for this model is 15 minutes. It also provides excellent accuracy for frequency measurements, with typical values of ± 100 ppm. The National Instruments PCI 6561 digital waveform generator weighs approximately 410 grams and has a physical dimension of 4.96 x 13.9 inches. It has a recommended operating temperature range of 0 °C to 45 °C and a storage temperature range of -20 °C to 70 °C.